Omni Long Antenna Dual Band 50 Ohm (9 dB, SureCall SC-100-L)
Omni Long Antenna Dual Band 50 Ohm (9 dB, SureCall SC-100-L)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-100-L
Need more powerful exterior 50 Ohm directional antenna with up to 26 dBi Gain option? For extremely weak signal areas, consider unidirectional RF-Boost High Power Long Range Antenna to replace any 50 Ohm Yagi / LPDA or Omni antenna within your signal enhancing system. It is ultra wide-band and ultra directional parabolic metal grid antenna. It requires precise directional focusing using signal meter for max. add'l Gain of up to +26 dB.
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
Omni Long Antenna covering Dual-Band 800 & 1900 MHz on 50 Ohm systems is an omni-directional antenna. It provides 9 dBi Gain on both 806 to 894 MHz band and 1850 to 1995 MHz frequency bandwidth. SureCall SC-100-L/ Cellphone-Mate CM-100-L purchase includes the mountinghardware for perfect attachment to a mast, antenna or existing pole. UPC: 896831002272.
Mount it upright for the best possible results. Ensure the antenna's chrome tip is pointed upwards while its fibreglass part is mounted unobstructed in virtually every direction atop the roof line. The dual band long antenna has an N-Female connector type, 50 Ohm impedance and weighs 11 oz.
SureCall SC100L or CM100L is a roof or wall mount antenna best for marine, RV or urban building installations. This antenna is omni-directional, a property that gives it an ability to collect signals generally from different sides. Therefore, you need not point it to any particular tower for it to work perfectly. Antenna's range stands at about 50 miles from an unobstructed tower.
For best results mount it upright. SureCall SC100-L or Cellphone-Mate CM100-L is compatible with a number of cables and amplifiers from SureCall, such as 4G boosters, RV boosters, accelerator kits, SOHO series of boosters, low coax cables as well as all in-building series of amplifiers on 50 Ohm system. It is very easy to install. It covers dual band frequencies as stated above. It is weather resistantant. It has an N-Female connector type.
Dual band omni-directional 50 ohm fiberglass antenna provides excellent signal boosting for cellular and wireless connectivity, providing a whopping 9 dB Antenna Reception Gain. Antenna includes a mounting kit, and can be set on walls or roofs. It is ideal for downtown settings, RVs, or marine installations, where signal strength is already reasonable at 3+ bars.
This Omni-directional antenna gathers signal from all sides, and does not need to be pointed at a cellular tower. It is easy to install, and weather resistant. Connectivity begins here. Omni-Directional Antenna - Dual Band Fiberglass Antenna (SureCall SC 100L/ Cellphone-Mate CM 100L).
From the manufacturer:
Summary.
- Outside use.
- Omni-directional.
- 9 dB Gain.
- 2G, 3G.
- Dual Band (800 & 1900 MHz).
- Weather resistant.
- Easy to install.
Overview.
This long omni-directional antenna is the best performing dual band antenna on the market. It is most often used with our dual band in-building amplifiers.
Cellphone-Mate CM100L or SureCall SC100L two band fiber-glass antenna is an omni-directional antenna that gathers signals from all sides and does not need to be pointed toward a cellular tower. Range of antenna is approximately 50 miles to, and from cellular towers (free of obstructions). Besides the antenna itself, parts include mounting equipment for either a flat horizontal surface or a wall. It should be mounted in an upright position for best results.
SureCall SC-100-L Specifications.
Frequency |
806-894 / 1850-1995. |
---|---|
Input Impedance | 50 ohm. |
Antenna Gain | 9 dB. |
Beamwidth | 118/140. |
VSWR | ≤2:0. |
Polarization Type | Vertical. |
Radiation | Omni-directional. |
Maximum Power | 10 W. |
Connector type | N Female or based on customer request. |
Cable type | SC400 or SC240 recommended. |
Height (inches) | 16.18”. |
Diameter | 0.75”. |
Weight | 11.7 oz. |
Mount | Mount to roof. |
Operating Temperature | -22°F to +140°F. |
Color | White. |
SureCall SC-100-L Antenna Set Up Instructions.
Step 1: Slide both mounting brackets over the mounting sleeve leaving them loose for the moment.
Step 2: Remove the plastic thread protector cap from the bottom of the antenna.
Step 3: Slide your coax cable (not included) through the mounting sleeve (with mounting brackets) and snugly hand tighten the coax cable connector onto the threads at the bottom of the antenna.
Step 4: Slip the mounting sleeve over the base of the antenna. Align the hole in the mounting sleeve with the screw hole in the antenna and fasten the two together using a small machine screw and washer.
Step 5: Space the mounting brackets as wide apart as possible on the mounting sleeve and (after ensuring that both brackets are facing the same direction) tighten the brackets using the set screws.
Step 6 (Pole mounting): Mount the entire assembly to a 1" to 2" diameter pole (not included) by placing the U bolts around the pole and tightening them through the holes in the mounting brackets using the nuts and washers. The antenna should be mounted with the chrome tip pointing toward the sky (perpendicular to the ground). For best results, the white fiberglass portion of the antenna should be mounted above the roof line and unobstructed in all directions.
Alternate Step 6 (flat vertical surface mounting): The antenna can be mounted to a flat vertical surface by replacing the U bolts with wood or metal screws (not included). For best results, the white fiberglass portion of the antenna should be mounted above the roof line and unobstructed in all directions. Secure the screws through the mounting brackets directly into the flat vertical mounting surface ensuring that the chrome antenna tip is pointed towards the sky (perpendicular to the ground).
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
If i have no signal, but the tower is about 10 miles away will it give me signal at my phone cell.I use a cell phone mate booster whit a 800 MHz Yagi Antenna (50 Ohm, SureCall SC-230-800)it was give me signal but it seam that the three have grown and i lost my signal.thanks
I would recommend our 50 Ohm Yagi wideband antenna which is the most powerful antenna:
https://www.signalbooster.com/products/full-band-yagi-antenna
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products