Comba Public Safety 5W Class B Simplex TX/RX separate UHF BDA (AC)
Comba Public Safety 5W Class B Simplex TX/RX separate UHF BDA (AC)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: RXUHF-B36AC-SPX
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Comba CriticalPoint RXUHF-B36AC-SPX Public Safety Class B, simplex UHF BDA is AC powered and includes different outputs and inputs for RX and TX without a duplexer included. Separate antenna paths for RX and TX are needed.
A UHF simplex bi-directional amplifier supports SNMP web-based intelligent GUI configuration and internal duplexing and simplex. With up to four wide-band filters, it also supports traditional analog and digital communications at the same time. Oscillation in the amplifier is prevented by an integral isolation test in the system. Base station noise minimization is accomplished by PA uplink shutdown.
Summary:
Comba Telecom's Critical Point RXUHFB36ACSPX is a Class B, AC powered, simplex BDA with separate TX and RX inputs and outputs. No duplexer supplied. Separate TX and RX antenna paths are required. Comba UHF Public Safety Bi-Directional Amplifier.
Compliances: NFPA 1221/IFC (dry contact alarms) and NFPA 1221/IFC (NEMA 4 enclosure).
Highlights:
- 36 dBm Composite Power Downlink.
- 30 dBm Composite Power Uplink.
- 0-30 GAR [Gain Adjustment Range (dB)].
- -33 degrees to +60 degrees centigrade operation range.
- Weight is 77.0 lbs.
- Type N-Female RF connectors.
- Measures 15.4 inches Width by 12.4 inches Length by 31.5 inches Height.
Features:
- Supports P25 P1/P2 digital and conventional analog communications simultaneously.
- Simplex and internal Duplexing supported.
- Up to 4 wideband filters.
- Uplink PA shutdown bring the minimum noise for Base Station.
- Built-in mandatory isolation test to prevent BDA oscillation.
- Web based GUI for intelligent configuration, SNMP supported.
- NFPA 1221 / IFC compliant dry contact alarms.
- NFPA 1221 / IFC compliant NEMA 4 enclosure.
Technical Specifications:
| Manufacturer: | Comba Telecom, Inc. |
|---|---|
| Composite Power Downlink: | 36 dBm. |
| Composite Power Uplink: | 30 dBm. |
| Gain Adjustment Range (dB): | 0 to 30dB. |
| Bands Supported: | UHF. |
| Operating Temperature Range: | -33 to +60 deg. cen. |
| Item Height: | 31.5 inches. |
| Item Width: | 15.4 inches. |
| Item Depth: | 12.4 inches. |
| Item Weight: | 77.0 lbs. |
| Qty/ Uom: | 1 each. |
| RF Connector Type: | N-Female. |
WARNING:
Per FCC laws and regulations, this INDUSTRIAL GRADE device must not be installed by consumers. It is designed for installation by QUALIFIED INSTALLERS only. You MUST have an express consent in writing from all Carriers in your service area to operate this device. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation. Please submit public safety distributed antenna system installer questionnaire for a quote, if you require professional installation and assistance with distributed antenna system design, consent and approval process with our certified public safety distributed antenna system installation service.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
