SureCall Fusion2Go Max Vehicle Cell Phone Signal Booster.

SureCall Fusion2Go Max is the most powerful in-vehicle cell phone signal booster available on the market. It boosts 2G, 3G, 4G LTE, 5G E cell signals for all cellular devices and carriers in the US, Canada, and Mexico for best performance in both urban and rural environments.

SureCall Max uses Extended Range Technology (ERT) to capture cell signals at their strongest point outside the vehicle, improving call reliability and data performance inside the vehicle. It also features the strongest transmit signals back to the cell towers to keep you connected in the weakest signal environments.

Per customer feedback over the phone, this is the best vehicle cell booster on the market regardless of your vehicle type. We call this our 50 mile cell phone booster because customers have complimented that it has helped them get connection to cell tower 50 miles away. Designed, assembled and tested in USA.

Leaving all other variables aside among all brands and models for a moment, the reason for its best performance may be that it has a unique technology called Extended Range Technology (ERT) which boosts signals right at the top exterior antenna even before sending it to signal amplifier for being amplified again. You must try it to believe the improvement - we will give full refund up to 60 days from receipt, if not fully satisfied.

We think of SureCall Max Fusion2Go kit as a "Fusion2Go 3.0" with double the power on the low bands, which are the main frequencies used in rural areas where the majority of mobile boosters are used. It is equipped with Extended Range Technology (ERT) that will help maintain connectivity even further off the grid, while improving Signal to Noise Ratio (SNR) which provides a higher quality signal that translates to better data performance.

Please note limitations and reason for those limitations.

Limitation: If you plan to purchase another set of exterior and interior antennas to move the base unit from one vehicle to another easily, that is not possible with this kit. Exterior antenna cannot be detached from signal amplifier base unit. Therefore, the main base cannot be moved over to another vehicle without removing exterior antenna with its cable.

The reason for this limitation is due to its extended range technology (ERT) which makes this the most powerful simultaneous multi-carrier vehicle cell signal booster that it is. With this technology, its exterior antenna acts as a pre-booster. Thus, its exterior antenna boosts signal after catching it to pump maximum signal inside vehicle for the main booster to amplify (again!). ERT helps enable this kit to provide higher uplink and downlink power than any other multi-carrier cell phone booster.

Therefore, to ensure that this exterior antenna with built-in prebooster is not replaced inadvertently or by mistake with another basic antenna making this kit useless, its exterior antenna cable has been permanently attached to the base.

If you need a vehicle cell signal booster kit that can be transferred from one vehicle to another quickly without removing its exterior antenna & cable, then please consider SureCall Fusion2Go 3.0 or SureCall Fusion2Go 3.0 RV cell phone booster kit (Non-ERT). Fusion2Go 3.0 and Fusion2Go 3.0 RV kits offer slightly lower uplink & downlink power but they are such that you can buy an extra set of their antennas for installation in another vehicle so that you can unscrew both antenna cable connectors from base unit to switch the main booster unit easily from one vehicle to another without having to remove and re-route their antennas and cables.

Most Powerful Vehicle Cell Phone Signal Booster for All Carriers.

• Unique Feature # 1: SureCall's game-changing patented Extended Range Technology (ERT) and 2XP technologies that provides twice the uplink power, increased downlink gain, and higher Signal to Noise Ratio (SINR) than the closest competitor.
• Unique Feature # 2: Stay connected in the weakest of signal environments and enjoy fastest data speeds, better call clarity, largest in-vehicle coverage and more simultaneous users over all other competing boosters.

More Benefits:

FusionToGo Max is the most powerful all-carrier, multi-user cell phone signal booster for in-vehicle use. It installs in 3 easy steps and increases voice, text and 4G LTE data signals for all mobile devices inside the vehicle. Fusion 2Go Max system has revolutionized the vehicle signal booster by featuring the patented Extended Range Technology (ERT) to keep drivers connected to more distant and harder to reach cell towers with the strongest possible signal.

1. Significantly boosts all North American carriers' signals including Verizon, AT&T, Sprint and T-Mobile to reduce dropped calls, improve call clarity and data streaming performance.
2. Supports multiple simultaneous users and mobile devices.
3. Compatible with all cellular devices, including hotspots, while extending their battery life.
4. 5G Phone Compatible - Boosts voice and 4G LTE data signals on 5G phones and devices.
5. Quick and easy install and transferrable to any vehicle.
6. Features Extended Range Technology (ERT) and 2XP technologies that provide twice the uplink power, more downlink gain, and higher Signal to Noise Ratio (SINR) than the leading competitor giving the user the best voice and data performance in the most challenging of signal environments.
7. FCC-approved booster systems with one-time install & no recurring fees.
8. Includes 24/7 lifetime US-based tech support, 60 day money back guarantee and 3-year manufacturer's warranty.

Features:

• Most powerful in-vehicle cell phone signal booster that dramatically increases call reliability and 3G, 4G LTE, 5GE data speed and performance.
• Compatible with all major North American carriers including Verizon, AT&T, Sprint, T-Mobile, and more.
• Features Extended Range Technology (ERT) that provides 2X more power than ALL OTHER wide-band vehicle signal boosters.
• Continually optimizes gain ensuring booster is always operating at max performance.
• Supports multiple users and devices simultaneously.
• Quick set up, no programming or service fees.
• Industry's best 3-year warranty, lifetime US-based tech support, and a 60-day money-back guarantee from SignalBooster.com.

What is unique about this kit?

With ERT technology, the signal is boosted in exterior antenna and boosted again in signal amplifier. With ERT, exterior antenna captures cell signals at their strongest point outside the vehicle, improving signal quality to help maintain calls and better data performance inside the vehicle. Extended Range Technology (ERT) adds 2X the power over ALL OTHER wide band vehicle signal boosters to help stay connected where others simply cannot. It offers the strongest uplink signal resulting in maximum vehicle-to-tower connection even in the weakest of signal areas.

SureCall Fusion2Go Max Cell Phone Booster Kit Components:

Includes exterior magnet-mount antenna with built-in booster equipped with ERT technology, interior Fusion2Go booster, patch antenna, cables, 12V DC power supply and quick install guide.

Only 4 Steps to SureCall Fusion2Go Max Vehicle Cell Booster Set-Up:

STEP 1. PLACE OUTSIDE ANTENNA ON THE VEHICLE’S ROOF.

Place the magnetic-mount antenna on the top of your vehicle, preferably toward the back, Ensure that the antenna has at least a 12-inch radius clear of obstructions and other radiating elements, such as a radio antenna. *For non-magnetic vehicle body, use the adhesive option included in package. Run the cable from the outside antenna across the car’s roof and into the car. To hide and protect the antenna cable, carefully pull down the door seal, run cable underneath it and push the seal back into place. Note: The outside antenna must not be collocated or operating with any other antenna or booster.

STEP 2. INSTALL INSIDE ANTENNA.

Identify a location for the inside antenna on or near your front dashboard that is: (1) Within 2-3 feet of typical cell phone location, (2) At least 8 inches (20cm) from cellular devices and (3) At least 4 inches (10cm) from metal. Peel Velcro backing and apply to a clean dry surface in your chosen location. Or try this - Use the free vent clip provided with your product as a mounting surface then simply clip to an air vent. Please note that if buying kit with desktop antenna, the separation between the desk top antenna and the external antenna needs to be 20 feet to 30 feet, in order to prevent oscillation.

STEP 3. PLACE BOOSTER AND CONNECT CABLES.

Select a well-ventilated location for the booster that is away from excessive heat, direct sunlight, and moisture. We often suggest installing beneath a seat or within the front console. Connect the cable from the outside antenna to the connection marked OUTSIDE and connect the cable from inside patch antenna to the connection marked INSIDE. Hand tighten the connections and secure any loose cable.

STEP 4. CONNECT TO POWER.

Connect the DC power cord connector to the signal booster and the adapter end to the cigarette lighter adapter to your vehicle. Once all connections are connected, turn the power switch on the adapter to ON. The Power LED will illuminate to indicate that the signal booster is ready for use. Note: When your car is off, turn the power switch to OFF to keep the booster from continuing to draw power to your vehicle. Place a call in a location you have previously experienced poor signal and confirm that your phone is receiving a boosted signal. Normal operation is indicated by Green LEDs (both flashing and solid). In the event Red LEDs appear, antenna adjustments may be needed.

What is the difference between different styles available?

While the exterior antenna cable that runs from outside ERT antenna to signal amplifier main unit is a RG-174 10 feet long coax cable, the length of coaxial cable that runs from signal booster base unit to inside antenna varies with each kit. The Patch Antenna Kit includes RG-174 10 ft. inside cable from amplifier to inside antenna (same length as exterior antenna cable length). However, the Whip on-amplifier antenna kit, table-top antenna kit, and wall-mount panel antenna kit includes low loss RG-240 20 ft. cable which is needed for longer runs in bigger vehicles such as RVs and Motorhomes. More importantly, the Gain provided by respective style/type of interior antennae within each kit varies as follows:

• Patch Antenna Gain (recommended for car, truck, SUV):
  LTE-A (AT&T) = 1.1 dBi. LTE-V (Verizon) = 1.1 dBi. 800 MHz = 1.1 dBi. 1900 MHz = 3 dBi. 1700 MHz = 3 dBi. 2100 MHz = 3 dBi.
• Amplifier-Mounted Whip Antenna Gain (recommended for Small Size RV, Motorhome):
  LTE-A (AT&T) = 1.2 dBi. LTE-V (Verizon) = 1.2 dBi. 800 MHz = 1.2 dBi. 1900 MHz = 3 dBi. 1700 MHz = 3 dBi. 2100 MHz = 3 dBi.
• Tabletop Antenna Gain (recommended for Medium Size RV, Motorhome):
  LTE-A (AT&T) = 2.5 dBi. LTE-V (Verizon) = 2.5 dBi. 800 MHz = 3 dBi. 1900 MHz = 5 dBi. 1700 MHz = 4 dBi. 2100 MHz = 5 dBi. Please note that to prevent oscillation, the separation required between the table top antenna and the external antenna is 20 feet to 30 feet.
• Wall Mounted Panel Antenna Gain (recommended for Large Size RV, Motorhome):
  LTE-A (AT&T) = 7 dBi. LTE-V (Verizon) = 7 dBi. 800 MHz = 7 dBi. 1900 MHz = 10 dBi. 1700 MHz = 10 dBi. 2100 MHz = 10 dBi.

Optional Cable Lengths.

Integrated cable from exterior antenna to signal booster base unit will not vary from ten feet cable provided. Interior antenna cable length of 20 ft. is provided with all Marine / RV kits (not the Patch Antenna Kit for car/ truck/ SUV that includes the shorter 10 feet cable which is enough for most cars, trucks and SUVs). However, internal antenna cable lengths can vary with purchase of any of the following cables. Please note that shorter the cable length you use, the better - because shorter lengths incur less Gain loss. If you plan to buy a cable for extending your existing cable length instead of replacing it, know that you will need the connector SC-CN-11 to connect it to your existing cable. The following cables are low loss, weatherproof, heat-shrunk and tested to perform at their best.

• 10 feet SC-240 Cable with FME-Female/N-Male connectors (SC-004-10-FN).
• 20 feet SC-240 Cable with FME-Female/N-Male connectors (SC-004-20-FN).
• 40 feet SC-240 Cable with FME-Female/N-Male connectors (SC-004-40-FN).

Video: How to install SureCall Fusion2Go Max?

From the manufacturer:

SureCall's Fusion2Go Max is the first and only multi-user booster of its kind to feature ERT, a patented system which drives faster data speeds while offering increased cell tower reach. This works by tapping into the signal closer to its source, which in turn improves the signal quality and allows for faster downlink/download speeds. The Fusion2Go Max also sports double the uplink power over other models, enabling users to travel farther away from cell towers without losing signal. As with entire line of Fusion2Go vehicle signal boosters, this Fusion2Go Max is designed to support multiple users simultaneously across all cell phone devices and carriers, giving them unparalleled freedom of mobility while also increasing speed and reliability for voice, text, and data.

Product Specifications.

Note: The term "IC" before the radio certification number only signifies that Industry Canada technical specifications were met.

Note: Works with all Carriers in USA and Canada. If ordering to be shipped to Canada, Canadian version of this kit will be shipped.

This SureCall booster supports 4G and 5G devices.

SureCall signal boosters are 5G compatible, which means they support both 4G and 5G devices. All SureCall's current vehicle and home boosters amplify any modulation (4G, 5G) that operates on the five most common up and down cellular frequencies bands. This makes SureCall current signal boosters compatible with 5G devices as carriers begin to transmit 5G signals over the existing frequency bands and towers.

For Canada:

This is a consumer device.

1. BEFORE USE, you must meet all requirements set out in CPC-2-1-05.
2. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST NOT be installed within 20 cm (8 inches) from any person.
3. You MUST cease operating this device immediately if requested by ISED or a licensed wireless service provider.
4. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
5. In addition, Consumer Zone Enhancers certified for mobile operation such as this may operate in a mobile in-vehicle or fixed in-building location.

For USA: