HardLine Half Inch CellFlex 50 Ohm cable WITHOUT Connectors Installed
HardLine Half Inch CellFlex 50 Ohm cable WITHOUT Connectors Installed
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: NMNML12250FFAFC
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
HardLine Half Inch CellFlex 50 Ohm cable WITHOUT N-Male Connectors Installed. Low VSWR, Low PIM. DC-3800 MHz. 155dBc.
Premium RFS CELLFLEX jumpers available in several lengths of cable with silver-plated body and gold-plated center pin connectors attached. All jumpers consist of RFS products. Custom jumpers are assembled by our factory trained and certified technicians.
Features:
- Factory Soldered Connectors.
- Low, Stable IM Performance.
- Waterproof to IP 68.
- Injection Molded Seal.
- Low VSWR.
- High Pull Off Strength.
Benefits:
- Next generation 4.3-10 interface standard: Reduces equipment footprint requirements and allows for a higher connector density. 4.3-10 right angle and 7-16 interface combinations.
- No minimum coupling torque required: Enables quicker installation without expensive tools.
- Connectors are soldered (inner and outer conductor) to cable: Provides superior mechanical and electrical, long life performance.
- 100% VSWR, PIM and interface tested: Results available for North American markets online.
- Fulfill the requirements of small cells and 5G: Guarantees a future-proof system design.
RFS' high-performance Celliflex jumper cables with next-generation connectors help expedite mobile operators’ deployment of LTE, 5G and small cell networks. New RFS Factory-Fit Jumper Cables based on the 4.3-10 standard are equipped with smaller connectors supporting up to 500 watts at 2 GHz. Their compact design reduces equipment footprint requirements and allows for a higher connector density.
This provides mobile network operators with more flexibility in how they configure the hardware and cabling at base stations and towers, especially with multi-band antennas. And the connectors don’t need a minimum coupling torque, so installation can be completed quickly without expensive tools.
All RFS Jumper Cables are optimized to deliver the highest performance in deployed networks. The new RFS Factory-Fit jumper cables feature an innovative soldered-on connector and are produced through a unique manufacturing process that is optimized to guarantee stable, premium VSWR and PIM level performance. RFS jumper cables are offered in all popular cable lengths and in custom lengths upon request.
Specifications.
| RF Connector Style | 4.3-10 Male Straight / 4.3-10 Male Straight |
|---|---|
| Connector Connection | Factory Fit (Soldered) |
| Bend Radius | 5 inches |
| Jacket | Material: PVC, Plenum Rated; Diameter: 0.629 inch |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Data Sheet
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
