4G 5G Cell WiFi Round Grid Parabolic Antenna 600-6500MHz 14-26dB Gain
4G 5G Cell WiFi Round Grid Parabolic Antenna 600-6500MHz 14-26dB Gain
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: ROUND-GRID
- Ultra Directional Antenna (Focused Aiming Required).
- Impedance 50 Ohm with N-Female Connector.
- Longest Reach and Highest Gain Outdoor Mounting Antenna.
- Gain (dBi): 15 to 26, based on frequency band.
- Operating Frequencies: 600-6500 MHz (600 MHz to 6.5 GHz).
- Bands: All Cellular 2G/ 3G/ 4G/ LTE/ 5G, WiFi, Wi-Max, AWS, GPS.
Would you like to buy the cable that connects to this antenna's N-Female connector? Usually purchased with cable that has N-Male connectors to match up connecters with all 50 Ohm cellular amplifier systems (to replace its outside stock antenna), or bought with cable that has N-Male to SMA Male connectors for many cellular modems or signal amplifiers such as Cel-Fi Go. For many mobile hotspots such as NetGear NightHawk, PepWave, CradlePoint, MoFi, and others: To match up connecters directly with their cellular modem (to replace whip or right angle stock cellular antenna), you may also need TS9 connector in addition to cable that has N-Male to SMA Male connectors.
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
High Wind Resistant Round Grid Parabolic Antenna (Cell 4G+LTE+5G+Wi-Fi 600-6500 MHZ Freq., Up to 26 dB Gain)
This is a professional high wind resistance version to prepare for anticipated Global Warming extreme weather conditions. The circular metal grid of this ultra directional wide band antenna is very rigid, yet very light, with all welded tube and bar. With 14-26 dBi Gain depending on frequency, this antenna provides strong consistent wireless coverage for all wireless platforms whether cellular or WiFi. Antenna horn can be left at default setting or can be pushed one click for great Gain in 3 GHz frequency range (see charts below). All instructions included. Package weighs 28 lbs. and the box size is 35 x 35 x 8 inches. Engineered and assembled in USA.
Review data sheet for illustrations, set-up, and installation guide.
Highlights:
- 2G, 3G, 4G. Works on all worldwide cellular bands for voice & data: LTE/ CDMA/ GSM/ UMTS/ AWS. 600Mhz band included.
- All WiFi Bands, and new 5G, 600 MHz & 3.5 GHz spectrum. 5G Band 71 compatible.
- ISM 900 & 1200 Mhz, SDR, plus GPS band Jammer
- Military, Government, HomeLand Security Bands.
- Scanner, Narrow Beam Spectrum Search & Energy Harvesting.
- Sirius-XM (with avail. amplifier) Deep Fringe to Stationary Sats.
- Simple install kit with tilt/ swivel mast bracket for 1.25 to 2 inches diameter pipe/ mast.
- Gain + Beamwidth Can Optimized at 600-900 or 4000-6500 MHZ.
- Light Weight, Easy To Assemble & Install For Home And Office.
- Heavy-Duty 1 piece reflector, solid and rigid.
Long range antenna boasts all-encompassing coverage with dual wi-fi frequency bands 2.4 GHz and 5 GHz. This ultra wide band antenna covers cell phone 3G, 4G LTE, 5G frequencies as well. It is a uni-directional parabolic grid antenna ruggedized for ultimate wind resistance. It covers a wide range frequencies from 600 MHz to 6500 MHZ (600 MHz to 6.5 GHz). 5G Band 71 compatible that includes 5G T-Mobile Band 71 Sub-6 Frequency.
It provides 14 to 26 dBi Gain depending on frequency band whether Cellular 800 MHz, PCS 1900 MHz and AWS 1710 / 1755 / 2110 / 2155 MHz or Wi-Fi 2.4GHz and 5GHz. Due to its vast frequency range and farthest directional reach, this is the best and most powerful Wi-Fi 2.4, 5 GHz and Cellular 3G, 4G, LTE, 5G over the air (OTR) super antenna introduced in 2020.
600-6500Mhz, Continuous Coverage, Instant Bandwidth.
Instantaneous gain, otherwise known as continuous gain and radiation, signifies the radiation of an antenna at the desired frequency range. Of particular benefit for the installer, instantaneous gain ensures that the product will effectively work out of the box anywhere and on a variety of devices within the 600 megahertz to 6.5 gigahertz spectrum, with maximum gain and with no calibration or adjustment required.
Rugged antenna design for maximum wind and weather resistance.
All aluminum rod and bar construction individually hand welded joints and double powder coated white finish for years of use. Fully designed structure to work for maximum performance and structural rigidity which maintains long range wide band solid radio link.
It can be used as the main or auxiliary antenna for cell phone signal booster system or in Distributed Antenna System (DAS) for catching maximum outside signal to send into the building for cellular and wifi amplification systems to amplify. Premium quality most powerful up to 26 dBi Gain wide band outdoor directional antenna with parabolic metal reflector grid puts together the power of directional antenna and ability of metallic grid reflector to capture max possible signal from any one direction with laser-like focus. This ultra high power parabolic antenna works on all 3G, 4G LTE, WiFi technologies. It operates on 50 Ohm impedance. It can be mounted on top of any house or building on roof outside to improve access to wifi or cell phone tower signals for boosters and amplifiers installed inside.
This can serve as an exterior wifi and cell phone signal booster antenna, and can replace outside antenna in a distributed antenna system (DAS). It transmits powerfully in one direction in a very small and narrow 7 degrees conical range so it must be aimed accurately to point to target signal origin for it to work for you. It is designed for using outdoors with any wifi 2.4 GHz or 5 GHz or 50 Ohm 2G, 3G, 4G LTE, 5G and 5G E cellular signal amplifier or repeater.
Compatible with most 50 Ohm cell phone repeaters and boosters, including Uniden, Hiboost, SureCall and Wilson weBoost. This uni-directional parabolic antenna will work for all international mobile frequency bands for 3G, 4G, LTE data and voice with any carrier including AT&T Wireless, Telus Mobility, T-Mobile USA, Bell Canada, Verizon, Rogers Wireless, Freedom Mobile, and many more. This is like a cell dish antenna, except that it has a metal grid instead of a metal dish. A metallic grid is better than a metallic dish because it will stay put in stormy weather since wind can blow right through it.
In most instances, this unidirectional Yagi-antenna is used as an on-building roof antenna to improve access to broadband wireless wifi or mobile tower signals for signal amplifiers and boosters that have been installed inside. The wide frequency range also makes it ideal for use at 900 MHz and 2.4 GHz for Wireless Video applications and WiFi.
Parabolic Antenna Grid Metal Reflector.
It features a die-cast aluminum round circular reflector grid that is corrosion resistant and mounted on the rear of the antenna. The grid improves the Gain, Front to Back Ratio and Return Loss. This grid bolt-on high gain horn antenna is completely water proof or weather proof. It can be mounted or bolted-on any antenna pole (not included, see options below) with the hardware included. The short cable attached terminates in a N Female connector which is typically used with 50 Ohm low loss coaxial cable such as Wilson400, LMR400, SureCall400, etc.
Compatibility, Uniqueness, Product Details.
- Compatible With WiFi Routers and 50 Ohm Cell Phone Repeaters, Amplifiers and Boosters.
- Covers Ultra Wide Range of Frequencies - 600-6500 MHz.
- High Efficiency and High Gain.
- Waterproof and weatherproof - Operates in any weather condition.
- Reflector Grid Improves Gain, Front to Back Ratio and Return Loss.
- U Bolt Mount Hardware Included.
- N-Female Connector (50 Ohm).
Note: An Antenna Tripod or an Antenna Pole, or a J-Pipe Mount, if needed, must be purchased separately. The mount or pole on which this parabolic antenna with metallic reflector grid can be installed, is not included with this purchase. Only the U-Bolts pole mounting assembly is included with this purchase.
Need help with installation of this antenna?
If, after receipt, you realize that you need help with installation, a professional installation of this antenna is available for your residential address or business commercial address anywhere within USA 50 states. Please contact SignalBooster.com with your order number after purchase and receipt of this antenna for your home, or office / retail store building for instructions to pay and schedule installation at the flat fee cost of $149.99 by a certified, professional installer.
Connectivity.
No connector is required if you already have a 50 Ohm cable with N-male connectors and the receptive connector is N-Female on your cellular device. If your cellular device has SMA connector or TS9 connector, here's a link of pigtail cable N-Female to TS9 Male connector and a link of N-Female to SMA-Male connector. N-Female connector connects to any type 400 cable such as SC400, Wilson400, LMR400, etc. and other end connector TS9 male, or SMA male connector connects to whichever connector-type cellular device you have.
Applications.
- Operates on all wireless Carrier networks.
- 2G, 3G, 4G and LTE Cellular Applications.
- Designed to be installed on office building and house roof.
- LTE, CDMA, GSM, UMTS, AWS.
- Stadiums, Warehouses and DAS Systems.
- Uniden, Hiboost, SureCall and Wilson Electronics Boosters.
- WiFi 802.11b/g/n.
- 900 MHz, 2.4 GHz, 5GHz Wireless Video.
Outstanding Features.
- Suitable for all Cellular and Wi-Fi bands.
- Directional outdoor antenna with power to reach up to 10 miles.
- Boasts up to +26 db gain, the highest continuous gain antenna available on the market today.
Ultra Directional 26dB Gain Antenna is one way you can future-proof yourself in readiness for the arrival of 5G, and you won't find a better option. When it comes to cellular signal, this antenna by SignalBooster.com is the most powerful antenna on the market today. In addition to working with Wi-Fi, this antenna works with 4G LTE, 5G E, and 5G. Rest assured that the Ultra Directional 26 dB Gain Antenna is a powerful antenna; in fact it is six times more powerful than any antenna that might come with a cell phone booster kit.
When you put more directional gain on your antenna, you're increasing signal quality; you’re reaching farther to the cell tower, and you’re able to capture more signal by increasing the performance of your booster. The result is great performance and future-proofing – a win-win situation! And, because of its sturdy construction, Ultra Directional 26 dB Gain Antenna will be a keeper for many years to come.
Water that gets in the horn mostly dries up or drains out thanks to the micro drain hole that is at the tip. Any residual water freezing inside of horn should not be of concern because horn composite material is strong enough to withstand expansion of small amount of water if it freezes.
Enjoy fantastic benefits listed below and enhanced gain performance plus continuous radiation between 600Mhz and 6.5GHz with the Cellular Ultra-Wide Band Antenna Horn with Metal Grid Reflector. Also offered by many companies including RSRF, Bolton Technical, Amazon, and Technical Antennas.
Ultra Wide Band Cellular and Wi-Fi Antenna.
If you're looking for an antenna with the maximum continuous gain currently available on the market, look no further than the Wifi and Cellular Ultra-Wide Band Grid Antenna. The unique design of this product is suitable for frequencies from 600 megahertz to 6.5 gigahertz, offering maximized directionality and gain at any frequency.
No matter which band you use, the Cellular and WiFi Ultra-Wide Band Parabolic Grid Antenna Horn can deliver the performance you need. Common compatible bands include radio telescope, satellite, Wi-Max, cellular 2G, 3G, 4G, 5G, Wi-Fi, CDMA, GSM, LTE, frequencies of homeland security, aerospace exploration, military, GPS, UMTS, ISM.
Maximally Optimized Gain.
This product has been designed to optimize both upper and lower portions of the ultra-wide bandwidth. This in-built feature ensures that, when the device is placed at the closest position to the reflector, signal will be enhanced in the 3 gigahertz to 6.5 gigahertz range. Placing the device at the furthest position from the reflector enhances the 600 megahertz to 960-megahertz range, while a midway position will enhance the range between 1.7 gigahertz and 2.3 gigahertz.
Radiation Pattern 700-895 MHz Mid Position:
Radiation Pattern 1700-2200 MHz Mid Position:
Radiation Pattern 3000-5000 MHz One Position Out Feed Horn:
Specifications:
| Frequency Range (MHz) | 600 - 6500 |
|---|---|
| Gain (dBi) | 15 Low / 21 Mid / 26 High Bands |
| Polarization | Vertical or Horizontal |
| Half-power Beam Width (Degrees) | Low Band: 20 Horizontal, 23 Vertical |
| Half-power Beam Width (Degrees) | Mid Band: 12 Horizontal, 15 Vertical |
| Half-power Beam Width (Degrees) | High Band: 7 Horizontal, 9 Vertical |
| Front-to-back Ratio (dB) | 20 AVG |
| Impedance (Ohm) | 50 |
| VSWR | 1.6:1 / 1.4:1 AVG |
| Max Input Power (W) | 100 |
| Lighting Protection | DC Ground |
| Connector | N- Female |
| Fits | Type 400 Cable with N-Male Connector |
| Dimensions (inches) | 32.5 |
| Dimensions, Boxed (in / mm) | 35 x 35 x 8.5 / 90 x 90 x 21.6 |
| Antenna Weight (lb / kg) | 5.4 / 2.5 with bracket |
| Packing Weight (lb / kg) | 14 / 6.5 |
| Rated Wind Velocity (mph / kph) | 150 MPH / 240 KPH |
| Wind Load @ Rated Velo (M / K) | 150 / 68 |
| Mounting Mast Diam. (in / mm) | 1.5-2.0 / 40-50 |
| Reflector Material | Welded Aluminum |
| Reflector Finish | Electrostatic Powder Coat |
| Radome Material | ASA Anti UV |
| Antenna System Color | Beige-White |
| Water Resistance | IPX Weather Rated |
| Operating Temperature (°C / °F) | -40 to +60 / -40 to +140 |
| Make | Designed and Engineered in USA |
Ultra-Wide Band Cellular Antenna Benefits:
Long Range Antenna:
The cutting-edge, patented technology utilized in the Ultra-Wide Band Cellular Antenna delivers boosted cell phone signals over longer ranges than ever before. There's no need to compromise on speed and reliability when you can enjoy long-range capabilities without any reduction in speed or strength.
Maximum Gain Boosting:
Imagine having access to maximum gain out of the box with no calibration or adjustment required. Offering the greatest continuous gain in today's market, the design of the Ultra-Wide Band Cellular Antenna is patented and completely unique.
Wide Band:
No matter which band you use, the Ultra Wide Band Cellular Antenna has you practically covered. This antenna is compatible with frequencies used by homeland security, cellular, satellite, radio telescope, Wi-Max, military, Wi-Fi, CDMA, aerospace exploration, 5G, LTE, GPS, GSM, ISM, 2G/3G/4G, UMTS, and many more wireless platforns, technologies, and applications.
Weatherproof Antenna:
Designed for rugged outdoor use, this Ultra Directional Cellular Antenna has been constructed of highly durable, reliable, and high-quality materials to withstand a multitude of temperatures and weather conditions.
What is in the box?
Along with antenna horn and grid, it has mounting hardware which includes 4 bolts and nuts with washers. Those help attach the large bracket to the grid. The kit has a large black bracket and 2 large U-bolts plus an N connector 90 degree adapter.
Summary.
- Ultra Directional Antenna (Focused Aiming Required).
- Impedance 50 Ohm with N-Female Connector.
- Longest Reach and Highest Gain Outdoor Mounting Antenna.
- Gain (dBi): 15 to 26, based on frequency band.
- Operating Frequencies: 600-6500 MHz (600 MHz to 6.5 GHz).
- Bands: All Cellular 2G/ 3G/ 4G/ LTE/ 5G, WiFi, Wi-Max, AWS, GPS.
- Carrier Networks: AT&T Wireless, Sprint, T-Mobile, U.S. Cellular, Verizon Wireless and all others.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
Would there be a problem if I used a Y-Adapter on Antenna Output to my WiFi Modem that has Two Inputs? Would the values remain the same on the Grid Parabolic Antenna? Or would I have problems?
For wifi radio plus the cell radio, it has to use a power divider or combiner.
However, your question seems to say it is for a 2 port single device. For sure, it needs a power divider (the kind used for DAS/BDA installations). However, we cannot speculate what the performance will be. The signal on the very same frequency from device may cancel each other out. -
Bonjour avez-vous un modèle d’antenne booster 26 db pour le Québec pour le réseau Telus et Bell merci
Oui, cette antenne passive améliorera le signal des réseaux Telus et Bell.
Si vous voulez un amplificateur de signal alimenté, vous pouvez considérer ceux énumérés ici:
https://www.signalbooster.com/pages/canada-cell-phone-signal-boosters -
What is the maximum length supported from the antenna to the booster?
Sorry, there's no set limit because it depends on the strength of signals caught by antenna at any specific location. If you aim it precisely to cell tower even up to 10 miles away using signal meter, you may get a strong signal to support the length you need despite signal loss you will incur. To make it worthwhile in many instances when in weak signal rural remote areas to minimize signal loss, we recommend using LMR600 cable instead of LMR400 cable if you plan to use cable over 75-100 ft.
-
Does this antenna have to be plugged into power source?
It is designed to be used in a signal enhancement sytem that contains a powered signal amplifier. However, it can be used as a standalone passive antenna without connection to power / electricity but the result may not be as impressive as when used within a cellular or wifi booster system or distributed antenna system (DAS).
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
