An item you're pre-ordering is on backorder so it will take few days to ship - are you sure you want to proceed to order it?
Close3 Ft. CB Unity Gain Antenna with 7 ft. RG-58 cable (RV/Marine)
3 Ft. CB Unity Gain Antenna with 7 ft. RG-58 cable (RV/Marine)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: AFC4051
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
3 Ft. Marine CB Antenna with nylon ferrule and 7 ft. RG58 cable.
3 feet tall CB Antenna is Unity Gain Marine Antenna. It is great for bass boats and other boats where fishing with 3 ft. antenna is more desirable for greater range. Coil is permanently sealed in white fiberglass. Marine antenna mount suggested (not included).
This is a one-piece, continuous-load, end-fed 1/2-wave CB Marine antenna with supplied cable. This 3' (0.9 m) antenna comes with a 1"-14 thread nylon ferrule.
This CB Antenna Kit includes:
- Marine CB Antenna Assembly 4051 with Rubber Grommet.
- Nylon ferrule with 1 inch - 14 thread.
- Includes 7 ft. cable and a PL-259 connector. The cable cannot be cut, but can be lengthened using an extension coax with suitable connectors (each sold separately).
- Suggested mount (not included): Nylon Marine Ratchet Mount
- Tools required (not included): Drill and 3/4" drill bit.
Technical Specifications:
| Band: | CB Marine. |
|---|---|
| Frequency: | 27 MHz Citizens Band (CB). |
| Bandwidth: | 440 KHz. |
| Mounting type: | Marine Ratchet Mount. |
| Antenna Gain: | Unity Gain. |
| Max. Input Power: | 25 watts. |
| Impedance: | 50 Ohm. |
| SWR: | 2.0:1 or less at Channel 19. |
| Ferrule: | Polycarbonate. |
| Coax Supplied: | 7 ft. of RG-58. |
| Connector Supplied: | PL259, not installed. |
| Height: | 3 Feet. |
| Color/finish: | White. |
| DC Ground: | Yes, DC Grounded. Note: Antenna will read shorted on continuity test - disregard. |
| Polarization: | Vertical. |
| Radiation pattern: | Omni-Directional. |
| Limited Warranty: | 2 years. |
| Dimensions: | 45 x 3 x 3 inches. |
| Weight: | 1.75 pounds. |
| Shipping Weight:: | 1.8 pounds. |
Installation Instructions.
Choose a mounting location that is as high as possible, as free as possible from obstructions, and as far as possible from other antennas and strong sources of RF, but within reach of the antenna's coax cable.
IMPORTANT: DO NOT CUT THE CABLE OR REMOVE THE CONNECTOR.
-
Mount the antenna using a Deck Mount (sold separately) or similar mount. Follow the instructions included with the mount you choose.
- Route the cable to your CB radio, keeping it as far as possible from other electrical equipment and cables. Do not cut or alter the antenna's cable. Drill a 3/4 inch hole for passage of the cable and connector, and seal the hole with the included rubber grommet.
Any excess cable should be rolled in a coil of at least 8 inch diameter and stowed in an out-of-the-way place, away from other electrical cabling.
Included cable can be lengthened using suitable connectors and 50-ohm RG-58 or RG-8 coax (each sold separately), without detrimental effect to antenna performance.
No need for elaborate grounding systems. This antenna works equally well on fiberglass, wood, or metal boats.
Cleaning Instructions.
To clean antenna, use mild dishwashing liquid (one that is not harsh to the hands and without ammonia) in lukewarm water.
WARNING: Do not let paint solvents, cleaning solvents, or adhesive caulking come in contact with antenna. Chemicals in these materials might destroy or damage the finish.
Reviews
Questions & Answers
Data Sheet / User Guide
Make An Offer
Warning
Related Products
