Monitor and Battery Backup for Cel-Fi QUATRA RED DAS - LARGE, Does Not Include Battery
Monitor and Battery Backup for Cel-Fi QUATRA RED DAS - LARGE, Does Not Include Battery
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 591PQPSNEXT1NEXT1612/F42-10L-100
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Monitor and Battery Backup Unit (Large, Does Not Include Battery) for Cel-Fi QUATRA RED DAS (Distributed Antenna System) is the central point of the Cel-Fi QUATRA RED system. It provides constant direct current, alarming, monitoring and battery charging capabilities. Integrates a wireless LTE modem and a wired Ethernet port for remote access to all the components via the Cel-Fi WAVE portal or the WAVE PRO app. Is NEMA 4 rated and UL2524 compliant. It supports 12 hours or 24 hours battery back up configurations. Two size versions available to optimize power requirements and installation cost. This listing is for the larger version. It supports up to 6 Coverage Units (CUs). The model # is F42-10L-100 / F4210L-100 / F42-10L100 / F4210L100. SKU is 591PQPSNEXT1NEXT1612.
Key features:
- Provides direct constant current to all the active components in the system including the Remote Annunciator Panel (RA) and the Emergency Power-off Switch (EPO) via PoE.
- Supports automatic supervisor signals for malfunction of the ERRCS.
- LTE modem built-in and integrated LAN Port for remote monitoring of the entire system.
- UL 2524 and FCC part 15 compliant.
- NEMA-4 enclosure.
Specifications.
| Part Number | F42-10L-100. |
|---|---|
| Enclosure Size (mm) | 178 × 690 × 200. |
| Weight without batteries | 30 kg. |
| Input voltage | 110 VAC. |
| Output voltage | 54 VDC. |
| Operating Temperature | 0 Degrees C – 50 Degrees C. |
| Operating Humidity | 95 Percent. |
| LAN Port | RJ45. |
| Port Capability | 10 Mbps. |
| PoE Port Power | 10 Watts. |
| Antenna Port | SMA. |
Supported Alarms.
- Normal AC power.
- Battery Charger Fail.
- Donor Antenna Disconnection.
- System Component Malfunction.
- Loss of Normal AC power.
- Low Battery Capacity at 30 Percent of Capacity.
- Active RF Emitting Device Malfunction.
- Donor Antenna Malfunction.
Supports 12 hrs. or 24 hrs. battery back up configurations.
It supports 12 hours or 24 hours battery back up configurations as shown below depending upon number of coverage units connected and whether operating on LMR single band, LMR dual band, LMR plus LTE.
Monitor and Battery Backup Unit (MBBU) System Interconnection:
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
