Camp Pro 2 V2 Wi-Fi Repeater Pack Long-Range With Antenna.

Easily extend wifi hotspots. This fully functioning wifi booster kit is all-inclusive and features everything needed to detect low strength Wi-Fi signals and create your hotspot by repeating the signals. This kit is perfect for use on large properties, boats, campers, and RVs.

The difference between version one and this new version two is the Tube Unit. The WiFi Camp Pro 2 V1 contained the Tube-UN model, and the Camp Pro 2 V2 has the Tube-UNA model which has a newer chipset and faster data throughput. See Wi-Fi Camp Pro 2 user manual to see how easy it is to set it up.

Long Range Wi-Fi Repeater Kit WiFi Camp Pro 2 is the second generation Wi-Fi long-range repeater kit from Alfa Network and includes the R36A USB repeater/router and outdoor 9 dBi Wi-Fi receiver with encased Wi-Fi antenna.

This is a new CampPro version is a professionally tuned and highly integrated system that extends Internet access for RVs, yachts, etc. from remote WiFi hotspots:

Intuitive QR Smartphone / Web Configurator device setup:

Simple & Comprehensive Setup. QR-Setup via smartphone or wizard via web demands no expertise during setting up.

Improved wireless performance and Signal Coverage:

Extends WiFi hotspot Internet access from far away, and enhances the WiFi coverage inside your yacht or RV. Easily make WiFi or VoIP calls when cellular signal is weak.

Simple to scan and find network:

Scans and connects to, and rebroadcasts around your yacht and RV. Instantly share the extended Internet access to your mobile devices, smart TVs, and gaming consoles.

Alfa R36A USB router.

The R36A USB repeater/router allows you to extend low strength Wi-Fi signals to your connected devices including tablets, printers, and smartphones. Featuring a redesigned setup interface and internal hardware upgrades, this repeater/router is used to share the Wi-Fi connection of your outdoor wireless adapter.

Alfa Tube-U(N) outdoor USB Wi-Fi receiver.

Outdoor Wi-Fi USB receiver includes a 26 foot compatible USB cable that connects to the R36A, which detects long-distance Wi-Fi signals by way of its antenna connector (N-male). Weighing just 4.1 ounces and at only 6.5 inches in height, this high-powered amplifier is both lightweight and very easy to mount. The two mounting ties included within the kit allow for easy fastening to infrastructures of all types. Outdoor installation becomes a breeze when receivers such as this one are built to handle extreme outdoor temperatures while being fully weatherproof.

You can choose to plug this Wi-Fi repeater pack into your Windows computer's USB port to extend the signal range of that one device, or you can pair it with the R36A to share your new boosted reception with various Wi-Fi devices simultaneously.

AOA-2409TF outdoor fiberglass encased 9 dBi omni antenna.

By plugging the antenna directly into the Wi-Fi receiver you can achieve an impressive range of reception with a wide vertical access scope of coverage, allowing you to pick up Wi-Fi signals as they bounce off nearby obstacles. With a height of 1.5 feet, this omnidirectional outdoor antenna is lightweight and competitively priced when compared to similar competing products.

How it works.

By using the three included elements in this Wi-Fi repeater pack, you can share your boosted Wi-Fi signal amongst nearby compatible devices. Using this kit is as simple as connecting the R36A to your computer with an ethernet cable and then completing the once-off setup and configuration process. Next, connect the antenna to the receiver, and then the receiver to the R36A's included USB port. The R368 includes inbuilt software to scan for Wi-Fi networks and will guide you through the set-up wizard, scanning for nearby wireless networks and connecting as appropriate. Next, you will need to enter a handle and password for your new Wi-Fi local network, then it is a simple matter of connecting your nearby devices (anywhere within a distance of a couple of hundred feet) to your new Wi-Fi network.

For more information and tips and instructions on installation, check out the full user manual for the Camp Pro 2 Wi-Fi Repeater Pack Long-Range With Antenna.

Range.

Of course, environmental factors like interference and physical obstacles can make it difficult to accurately predict the specific range that you can achieve. As a general guide, if you can normally achieve a very weak signal (such as one bar) to your desired network, this product should allow you to achieve a significantly greater signal. However, if your devices normally cannot connect at all to your desired network, this setup may not provide the results you're looking for.

Included in the box:

• Alfa R36A USB router.
• 5 dBi RP-SMA antenna (for R36 signal transmit).
• Tube-U(N) USB receiver + 8m (26 ft) USB cable.
• AOA-2409TF 9 dBi omni antenna (for signal receive).
• 12v power supply for R36 (supports 100-240v, has North America plug, use in Europe requires converter).
• Tube-U(N) needs no power supply, draws power from the R36 via USB cable.
• Waterproof tape and wire ties for mounting tube to pole.
• R36 car/vehicle power supply adapter.

Wi-Fi Camp Pro 2 Hardware and Software Setup Video Guide:

Using an Apple iPhone to set up Alfa WiFi Camp Pro 2 or Camp Pro 2 Mini.

How to set up Alfa WiFi Camp Pro 2 or Camp Pro 2 Mini on an Apple iPhone?

Let us list steps to take in order to set up Alpha Wi-fi Camp Pro 2 Mini on an iPhone 7. The process is going to be the same for other iPhones, and it will also be the same for the Alpha Wi-fi Camp Pro 2 Mini full version.

Setup Process.

The first thing we need to do is tap on Settings, and we're going to go in to Wi-fi. For the setup process, we don't want to be connected to a local internet network, we actually want to join the Wi-fi Camp Pro network. By default, the Wi-fi Camp Pro 2 network should not have a password when you get it out of box. When you get to alpha login screen, it will ask you to please set up the password to access setup in the future. Go ahead and create a secure password that you would like to use. It is going to ask you to type in the password again. Then tap submit.

Logging in.

You will be logged into the Alpha Wi-fi Camp Pro 2 setup area, and you should see a page that shows all the wi-fi networks around you. We're going to tap on the one that we want to connect to, and then tap the select button. This takes us to the final page of setup. If your network has a password, enter it into the hotspot password field. Once that is done, we're going to scroll down and create a network password. This is the password for your Wi-fi Camp Pro 2 network. We're using the same password as our office network where we're doing the test setup, but you can use whatever password you would like and then tap the finish button.

On screen instructions.

Let us take a look at on-screen instructions. It says verify wireless authentication, setup wireless and check connectivity, and tells us to please reconnect wi-fi and then select our Wi-fi Camp Pro 2 network. What we need to do is join the Wi-fi Camp Pro 2 Mini network again because we just completed configuration. The network is now password protected, and it has a lock symbol. We were put back on our office network by default. So we're going to tap onto the Wi-fi Camp Pro 2 network, and this time, it asks for the password. This is the password that we gave it in the final step of setup. It comes back with an error that says incorrect password; that means we mistyped the password, so we need to try again.

Connecting to the Internet.

Now we're connected to the Wi-fi Camp Pro 2 network. Let us see if we can get internet access. We're going to go to signalbooster.com, which is our business webpage. It loads the home page, so we know we have fully connected to the website.

If anything goes wrong at any time, you can go back and make sure you're connected to your Wi-fi Camp Pro network, and then you can open the safari browser and go to the login IP address for the device, which is 192.168.36.1. This is going to ask you for your administrator password that was used on the first setup step.

That gets us back inside the status area. It tells us what network we're connected to, and the signal strength.

Troubleshooting.

If it is showing that you're not connected to a network anymore, you can tap on the menu and go into easy setup, and this will start the setup process again. It will do a scan showing you the networks that the Camp Pro can detect, and you can pick out the network you would like to connect and go back to the setup process.