Outdoor PoE WiFi Receiver 2.4 GHz 802.11n AP/CPE IP68
Outdoor PoE WiFi Receiver 2.4 GHz 802.11n AP/CPE IP68
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: TUBE2HPAFC
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
802.11n Long Distance Outdoor Wi-Fi PoE AP/CPE IP68 is an outdoor long range multi-function PoE WiFi boosting product. Operating on 802.11n standard, it supports AP as well as Client Bridge modes. Thus, it can be used to transmit and receive a long range Wi-Fi signal outside. Since this is Ethernet based, it is OS independent. Therefore, it can be used with a Mac, PC, or any Ethernet enabled device. However, it must be configured on a computer using a web browser.
Features:
- IP68 Water Proof Certified.
- Easy to mount: 1/4-20 UNC nut.
- Includes waterproof sealing tape and wire ties for quick pole mount.
- 802.3at / af PoE.
It is a PoE device which means that it is accessed and configured via Ethernet cable. It also receives power over Ethernet cable. Therefore, there's no need to run long electrical extension cords. We have a selection of different length Ethernet cables available. This wifi coverage tool is suitable for outdoor use in campgrounds, marinas, etc.
Some technical knowledge of access points is required to configure this device. This purchase does not include an integrated antenna. It has an N-male antenna connector that can be used with any N-connector 2.4 GHz antenna such as the RF Boost antenna (longest range antenna). We carry compatible antennas and extension cables. It ships with PoE adapter plus mounting ties. This purchase has one 48v PoE power supply and power cord. No Ethernet cables are included with this purchase.
Specifications:
| Flash / SDRAM: | 16 M / 64 M |
|---|---|
| Transmit power: | Max 800 mW, regular 400 mW. |
| Receive sensitivity: | -90dBm @ 802.11n; -95dBm @ 802.11b/g. |
| Interface: | 1x 10-100 Base-T RJ-45 Ethernet. |
| Antenna connector: | Type N-male. |
| Mounting: | Pole Mount (Standard), 1/4-20 UNC nut. |
| Security: | Wired Equivalent Privacy (WEP) data encryption; Dynamic WEP key exchange WEP64/128, WPA, WPA2 80211x. |
| Temperature: | Operating: -20 ~ +65 Degrees Centigrade; Storage: -10 ~ +70 Degrees Centigrade. |
| Humidity: | Operating: 5 ~ 90 Percent. |
| Frequency: | 2.4 GHz ISM band. |
| Data Rate: | 802.11bg: Up to 54 Mbps; 802.11n: Up to 150 Mbps. |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
