Drive RV Antenna (Adjusts 7.5 to 20.5 inch)

Drive RV Antenna (Adjusts 7.5 to 20.5 inch)

$139.99 USD

Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.

Free Lifetime Support. SKU / Model: 311230

Call for FREE consultation:

1(855)846-2654

Need installation quote, or help with designing a custom solution? Submit a request for quote.

Description
Reviews
Questions & Answers
Data Sheet / User Guide
Make An Offer
Warning

Description

Product Description

Drive RV cell signal antenna is a versatile and powerful omnidirectional antenna engineered for RVs and weBoost in-vehicle boosters. Sought after for its improved design aesthetics and a variety of installation options, it is capable of extending its height from 7.5 inches to 20.5 inches for better range.

It is designed for use with a vehicle cell phone signal booster or specifically a RV cell phone signal booster because the cable that comes attached to it connects to the cellular amplifier unit. If you don't have a cell phone booster and only have mobile modem you want to connect it to for better cell reception, please make sure modem has SMA-Male connector so it fits the cable that comes with this antenna (cable has SMA-female connector but SMA-male and SMB-plug adapters also included), or you will need to buy a connector that makes its cable's SMA-female connector to fit your cellular modem or router.

With its 13 inches mast extension, 25-ft. RG-6 extension cable, L-bracket ladder mount, spring base, side-exit adapter, threadlocker, and mounting hardware, it can accommodate RVs and motorized homes of all sizes. It is a versatile, high-gain, omnidirectional antenna that is compatible with both weBoost Drive X and weBoost Drive Reach in-vehicle boosters.

This proprietary antenna stands out, not only due to improved aesthetics but also because it meets the toughest off-roading and outdoor standards. It also comes with an improved low-loss antenna cable to optimize performance on the road.

The Drive Reach RV antenna's all-weather, all-terrain construction meets current U.S. Military 810H and NEMA IP66 standards. This is Wilson Electronics' most durable antenna yet. It is resistant to high wind gusts, low tree branches, rain, dust, dirt, and more. Additionally, improved low-loss antenna cable optimizes performance on the road and at campsites for all carrier networks and devices.

Features:

Height adjusts from 7.5 inches to 20.5 inches.
Rated for off-road and outdoor use.
Designed for use with weBoost Drive X and weBoost Drive Reach.
Ideal for all RVs and motorhomes.
Covers 700, 800, 1700, 1900, 2200 MHz cellular networks.
All modes, voice and data.
High gain signal output.
Antenna can be configured into multiple lengths from 7.5 - 20.5 in.
Off-road rated to MIL-STD 810H for shock and vibration.
Works with standard CB antenna mounts, includes 3-way mirror rail mount.
Connects to mobile cellular boosters.
IP66 rated for outdoor use.
Assembled in USA.
2 year warranty.

Benefits:

13 inches mast extension can be added for increased antenna height, in addition to antenna's 7.5 inch length totalling 20.5 inches.
L-bracket mount to easily fit on exterior RV ladder.
Spring base to resist high winds and tree branches.
Durable construction repels rain, snow, and heat.

What is in the box?

Kit includes Outside Antenna, 13 inches Mast Extension and 25 ft. RG-6 Cable. It also includes Spring, Side Exit Adapter, Thread Lock & Antenna Mount. Here's exact list of contents:

Drive RV Antenna with 13 inches mast extension.
L-bracket ladder mount.
Threadlocker.
Spring base.
Side-exit adapter.
25-ft. RG-6 cable.
Mounting hardware.
SMA-to-SMB adapter.

How it works in conjunction with signal booster kit.

Outside antenna pulls in cell signal from the closest tower (this purchase).
Booster (not included with this purchase) amplifies the signal received by outside antenna.
Inside antenna (not included with this purchase) distributes this new signal throughout vehicle.

Technical Specifications.

Model Number	311230.
Frequency Band (MHz)	698-806, 806-960, 1710-1880, 1850-1990, 1910-2170, 2300-2700.
Peak Gain (dBi)	2.4, 2.6, 3.8, 3.8, 3.7, 4.3.
Gain (dBi), typical @ 2 Degrees Elevation	1.4, 2.4, 3.1, 2.7, 2.4, 2.6.
Cable loss LMR195 30 inches	0.3, 0.3, 0.5, 0.5, 0.5, 0.6.
Efficiency (%)	698-806, 860-960: >70 Percent; 1710-1880, 1850-1990, 1910-2170, 2300-2700: >65 Percent.
VSWR	<2:1.
Impedance	50 Ohm.
Maximum Input Power	10 watts.
Half-Power Azimuth Beamwidth	360 Degrees.
Half-Power Elevation Beamwidth (Degrees)	70, 78, 60, 70, 80, 33.
Antenna Type	Wide-Band Directional.
Connectors	SMA Male / SMB Plug.
Feed Cable Length	30 inches / 762 millimeter.
Polarization	Vertical.
Antenna Dimensions	7.422 x 2.688 inches / 188 x 68 millimeters
Antenna Shipping Dimensions	8.14 x 15.97 x 3.66 in. / 206 x 406 x 93 mm.
Packaged Weight	3.64 lb. / 1.65 kg.
Radiator Material	Aluminium.
Radome Material	Alumin Plastic Type: ASA (Acrylonitrile Styrene Acrylate).
UPC	810005962209.
Radiation Patterns	Drive RV Antenna (311230) Data Sheet with Radiation Patterns.

Difference between the previous model weBoost 304415 and the new SKU 311230.

Why does the new RV antenna cost more than the old one, and what are the main differences between the discontinued part number 304415 and the new 311230? For starters, improvements in the new one are extensive regarding durability and weatherization features of the new RV antenna 311230 (and SKU 311229 for OTR trucks). The new antennas (both models 311230 and 311229) meet MIL-Spec for durability and are IPX7 rated. The new ones also have new improved design with all black masts, and improved cable that has lower loss than the older model version 304415 did. The new ones also have new mast lengths and main mast attached to the boost - Basically, these new antenna versions can be configured in more ways than the old version to get the right height for optimal performance.

Reviews

Customer Reviews

Questions & Answers

QUESTIONS & ANSWERS

Ask a Question

I have a Weboost Drive-4G-X booster on my RV, and need to replace the exterior antenna. The specs for my unit indicate it's a 75 ohm booster, but according to the data sheet on the Drive RV antenna that you sell, it's only 50 ohms. Will this work? And if so, is the 50 ohm marine antenna that you also sell going to work any better? Or perhaps it is just more durable? Basically, I want the best antenna available for my system, so any suggestions you can offer would be most appreciated. Thank you.

The best option is this reference Drive RV antenna, part 311230. The marine antenna has the same gain, as the RV antenna does. Secondly, it does not really bare any advantages for a RV. The 50 Ohm impedance is ok, for the booster also. Thank you.
I am interested in purchasing the Wilson Weboost Drive Antenna. I'm not sure it will meet my needs. I have a travel trailer on a seasonal site at a campground. The wifi signal is about 600 yards away and does not reach my trailer. If I install this antenna on the ladder of the trailer will it pick up the wifi signal? Also do I need to connect the cable to a router in the trailer so my phone can pick up wifi and receive text and email. If I need a router do you sell one or suggest one.

Sorry, the referenced Wilson weBoost Drive antenna you're referring to, is for cellular connectivity (698-2700 MHz cellular bands), not wifi frequencies 2.4 GHz and 5 GHz.

If you need better cell phone connectivity in RV, we suggest you consider buying the weBoost Drive Reach RV kit that we carry for that purpose which includes this antenna.

For wifi connectivity, we recommend RV wifi booster kit.
I just need antenna - no extra cable. I have new install and as careful not to over tighten base of antenna. I did use thread locker. After the extreme weather my antenna has cracks on the base. What would an 311230 antenna cost me, and do you sell just antenna at lower cost?

Sorry, this antenna comes packaged with cable so we cannot sell antenna separately. We cannot discount this item either because shipping cost is very high on this item since it is big and heavy (flat shipping cost we offer at this website does not compensate for actual shipping cost).

Data Sheet / User Guide

Data Sheet

Make An Offer

We would very much like you to try our product(s) and services. To that end, we would like to extend an opportunity for you to make a reasonable offer on this item that you feel is fair. Do consider the fact that we already offer promotional discount code (coupon code) for 10% off on most products (order total $300+ required, some restrictions apply). Try coupon code, 10BFCM at the checkout for 10% off, now! If it does not work for an item that you're buying or if you still wish to make an offer, please complete & submit the form below. We will respond right away during business hours.

Product Name
Quantity*

This field is required. Please enter a value.
Offer Amt. Per Unit* $

This field is required. Please enter a value.
Your Email*

This field is required. Please enter a value.
Your Phone
(no spaces/characs)*

This field is required. Please enter a value.
*

Input Correct Captcha
Do Not Fill This Out

Warning

Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.

Kevin K. of Anderson, California gave the following review:

Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.

Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.

If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.

For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.