5 Tips on Buying a Cell Phone Signal Booster

Why the Current Outside Signal Strength Is Really the One Thing That Truly Matters.

The most important factor that determines how much coverage you are going to get from the signal booster is the strength of the outside signal. If the external signal is strong, you will be able to cover a large area, same as the maximum area of coverage as advertised by the manufacturer of the device.

If external signal is weak, then the inside coverage area won't be as much as advertised. Therefore, you must invest in a much more powerful signal booster. This means, the most important thing to make a note of when buying a signal booster is the strength of outside signal.

You can have a very rough estimate of the outside signal strength from the number of bars that appear on your phone. If there are 5 bars on the phone, then the signal is strong enough and you probably don't need a signal booster. If there're just one or two bars, then you have a weak signal outside your home or building. Then it makes sense to invest in a powerful booster.

To find out the actual signal strength of the outside signal with most accuracy, you will need to put your phone into a field test mode. In this mode, the phone displays the actual decibel reading of the outside signal.

See this article for instructions on how to activate the field test mode on your Android or iPhone.

Signal Booster Components.

Here's a detailed look at the three main components of the cell phone booster.

Outside Antenna.

Exterior antenna is mounted on the roof or fascia of the house or building. The objective is to find a spot that is as high as possible, that is able to catch the weak 3G and 4G LTE signal.

There are two types of outside antennas:

• Omni-directional antenna: This type of outside antenna catches signals in a 360-degree angle. Omni-directional antennas should be used if you want to boost signals from multiple carriers and the outside signal is already reasonably strong.
• Uni-directional antenna or Yagi antenna: A Yagi antenna is shaped like a triangle and catches outside signal from a 45-degree field of vision. It has a reach that goes much farther than what you will get with an omni-directional antenna. This is normally used to boost signals from a single carrier, and is preferred when the outside signal is weak.

Amplifier.

An amplifier or a cellular repeater receives the signal from the outside antenna and boosts it by 32X times. Amplifiers are measured in terms of dB (decibel) output. Amplifiers used in home-based systems offer anything from 500 to 20,000 sq. ft. of coverage.

Most exterior cell phone signal strength ranges from -50 dB to -120 dB. In terms of bars, -50 dB means full bars and -120 dB means zero bars or a dead zone. Amplifiers boost the cell phone signal so as to get the reading closer to -50 dB.

You should get a +60 dB gain at least with an amplifier. The best and most powerful amplifiers give you a +70 dB gain. Amplifiers that have been specifically designed for vehicles should give a +25 dB gain at least, with a maximum of +50 dB gain.

If you are able to get a consistent -94dB or better signal outside, then signal amplifier will be able to multiply signal to boost reception indoors substantially. However, the typical cut off point for signal boosters to be able to amplify is -105dB outside signal. If exterior signal is less than that amount, say for example, -115dB, then signal amplifier will not be able to help in such a situation.

Inside Antenna.

An inside antenna is another important component of the cell booster. When the much improved signal is passed on from the amplifier to the inside antenna, the inside antenna rebroadcasts this much enhanced signal to areas within the house, building or vehicle.

There are two types of inside antennas:

• Panel antenna: Panel antennas are wall-mounted and rebroadcast the strongest signal received from the amplifier to the areas that are closest to them. They are ideal for a small apartment, studies room, home office, living room or bedroom, or a cabin.
• Dome antenna: Dome antennas are ceiling-mounted. They distribute the signal equally through the area.

Some signal booster brands prefer panel antennas while others choose dome antennas with their devices.

Wilson Electronics, which makes cell boosters under the weBoost and Wilson Pro brands, generally makes use of panel antennas. These're uni-directional antennas which are more powerful but it they are required to be pointed towards nearest cell tower providing most signal strength. SureCall signal boosters on the other hand mostly uses dome antennas. These're multi-directional antennas that are not as powerful in attracting signals but they draw signals from all directions.

We sell both WilsonPro/ weBoost and SureCall devices.

How to Choose a Signal Booster?

There're many things to consider when choosing a signal booster. The first thing to consider is the type of the booster.

#1: Types of Signal Boosters

There are two types of signal boosters sold on the market.

Home and Business Signal Boosters.

A cell phone booster for home is used to enhance the signal within a house, office or building. A signal booster for home is far more powerful than a vehicle booster. The installation for such a device is permanent and may feature a network of internal antennas for distributing the improved signal through the house or building.

A cell phone signal booster for home has the same set up as explained above – an external antenna mounted on a roof, an amplifier and a network of internal antennas. The external antenna is strategically located so as to pick up the strongest signal from outside, the signal is boosted by the amplifier and distributed through the house or building by the internal antennas. The process works just as well in the reverse, ensuring a perfect 2-way communication between the phone and the cellular tower.

Car, Truck, RV and Marine Signal Boosters.

Signal boosters used in cars, trucks, marine vehicles and RVs are not as powerful as those meant for homes or businesses. The one thing to keep in mind with respect to cell phone boosters for vehicles is that they should be capable of picking the constantly changing outside signal – which varies in strength as the vehicle is in motion.

Further, these boosters should not affect the other cellular devices in the other vehicles on the road. They should be able to prevent oscillation or feedback in the system.

These devices are easy to install, as they don’t have to be installed on a permanent basis. You only need to attach the external antenna to the roof of the car with a magnetic base. The cable can be run through the door frame.

The amplifier is small in size and can be hidden away under the seat. The inside antenna is usually velcroed and attached to the dashboard of the vehicle with an adhesive.

Boosters for trucks, RVs and other large vehicles are installed on a more permanent basis. The layout of the cable that runs from the antennas to the amplifier is carefully thought out. But it is still easy to install.

The only real difference in the working of a signal booster for a vehicle with that of a boost for a home or business is that the amplifier has to be designed to adjust to the fluctuating outside signal more efficiently. Also, the boosting power is kept low so that the booster does not impact the cellular devices used in the other vehicles on the road.

#2: Carriers and Networks to be Supported.

The next important factor to consider when choosing a signal booster is the carrier or network that you want to support with it. There are boosters that are made specifically for a particular carrier, such as Sprint, Verizon and AT&T. Then you have boosters that made to support specific networks, such as 2G, 3G or 4G LTE.

Most carriers in the U.S. and Canada use the same frequencies for both 3G and 2G networks – so you can use the same signal amplifier for handling voice calls and data. However if you want to support a 4G LTE network, then you will need an amplifier that works with 4G LTE in addition to 2G and 3G. Such devices are more expensive. We carry mostly 4G LTE boosters which are backward compatible and boost 2G and 3G signals as well.

If you want to support more than one carrier, then it is preferred you buy a device with omni-directional external antenna. If you want to support just one carrier, then a strong yagi antenna will more than suffice.

#3: External Signal Strength.

As discussed earlier, the strength of the outside signal will decide what sort of an amplifier you should buy. If the outside signal is very weak, then you will have to invest in a more powerful booster.

If the outside signal is reasonably strong, then you may as well invest in a cheap or moderately priced booster that delivers mediocre gains in signal strength.

#4: Area to Be Covered.

The fourth factor to be noted is the size of the area that needs to be covered by the enhanced signal. The layout of the area is important as well.

The size of the area and the strength of the outside signal will give you a good idea of just how powerful you want the amplifier to be. The layout will tell you how many internal antennas you need and their type.

If the area to be covered is located on just one floor, then you should choose a dome antenna to go with it. If you want multiple floors to be covered, then panel antennas are the right choice as they ensure that the signals are distributed in a better way through the house or building.

FCC Approval for Cell Phone Signal Boosters.

The Federal Communications Commission (FCC) is a federal government agency regulates the use of cellular frequencies in the USA. In 2014, the FCC formally approved the use of cell phone boosters to enhance cellular signals by consumers across the United States.

In addition to this, the FCC has introduced a number of checks and balances to ensure that the booster equipment do not interfere with the network of the carrier that it supports.

One such measure is a requirement for all boosters to be registered with the carrier that it supports. All new boosters go through a series of tests before getting certified by the FCC.

The FCC has one set of regulations for carrier-specific boosters and another for boosters that amplify signals from all carriers.

For boosters that can work with any carrier, the amplifier gain should not be more than certain dB over the 700 MHz band and not more than certain decibels over the 850MHz band. The downlink output power should be less than certain dBm.

For carrier-specific boosters, the amplifier gain should not be more than 100 dB over any band of any frequency. The downlink output power should be certain amount of dBm over a 5 MHz block.

"Buyer beware" warning to consumers about purchasing uncertified boosters.

Never purchase blackmarket cell phone signal boosters because they are probably unlicensed, uncertified and illegal for use, atleast in United States and Canada. SignalBooster.com carries only licensed, certified cellular signal boosters. FCC certified for USA cell phone signal boosters and IC / ISED approved for Canada cell phone signal boosters. Using such devices that do not comply with government and carrier requirements can cause serious damage to wireless networks and can make users liable for damages incurred. In USA, Carriers have granted blanked pre-approval only to FCC certified kits made by reputable manufacturers - However, registration must be submitted to carrier before their use.

Signal Booster Terminology.

• The FCC – Refers to The Federal Communications Commission, a federal agency that regulates the use of the airwaves in the United States. The FCC also regulates the use of signal boosters in the country.
• Gain (dB) – It is a measure of amplification, represented by dB. The higher the dB or the gain, the higher is the amplification achieved by the signal. 0 dB gain means zero gain. 10 dB gain means the signal strength is enhanced by 10 times, 20 dB gain means it is enhanced by 100 times more signal, and 30 dB gain means the signal is enhanced by 1,000 times.
• Donor antenna – Refers to the external antenna that is placed outside the home, building or vehicle.
• Indoor antenna – Refers to the internal antenna that is installed within the house, building or vehicle.
• Omni-directional antenna – Refers to an antenna which receives and transmits signals in all directions. Has less antenna gain.
• Directional antenna – Refers to an antenna which sends and receives signals in just one direction.
• Dome antenna – Refers to a type of indoor antenna installed in the ceilings of house or building which transmits signals downwards.
• Panel antenna– Refers to a type of indoor antenna installed on walls that transmits signals to the rest of the room.
• Lightning surge protector – Refers to a device that protects your signal boosting equipment against lightening.
• Antenna gain (dBi) – Antennas have a gain too, represented by the Antenna gain or dBi. This is based on a logarithmic scale. A 0 dBi antenna gain means the antenna cannot hold any signal, 10 dBi antenna gain means that the antenna can receive and transmit 10 times as many signals from the specified direction compared to other directions.
• Attenuation (dB) – This refers to how much a signal weakens over a distance, or when it passes through construction material. It is measured in dB, and is a negative value. A -10 dB attenuation means the signal is 10 times and a -20 dB attenuation means the signal is 100 times weaker.
• Radio frequency (RF) – Refers to the frequency used to transmit a wireless radio signal. This can be a Wi-Fi signal, cellular signal, WiFi or just FM and AM radio.

  Downlink signal – Refers to the signal transmitted from the cellular tower to your phone.

• Uplink signal – Refers to the signal sent from your phone back to the cellular tower.
• Signal strength (dBm) – The strength of a wireless signal is measured in dBm. dBm is a logarithmic measure.
• Coaxial cable – Refers to the special type of cable which carries the RF signal. It consists of a conductor at the center made from copper, which is properly shielded. There is also an outer conductor.

We have talked about everything you need to know about cell phone boosters. You don't really need to learn more about these devices than what is written in this guide, unless you are a professional installer of signal boosters.

If you need help, just give us a call at 1-855-846-2654 for a free consultation or submit a request for a quote to get started as soon as possible. We will be happy to provide a customized booster solution based on your requirements. If you need help with the installation, our team of professional installers will do that for you – you don’t have to do a thing!

Here are our Product Recommendations for Cell Phone Boosters:

What are the Best Cell Phone Signal Boosters?

Best Signal Boosters for Homes and Small Offices.

We have explained why the strength of the outside signal is such an important consideration to be made when buying a signal booster. We have also shown how to check the strength of external signal.

We have chosen the best cell phone boosters for homes and small offices based on the signal strength outside your house or building.

When the Outside Signal is Strong:

For Smaller Homes and Apartments (Area of Coverage is 2,000 to 2,500 square feet or Less):

SureCall Flare 3G, 4G, LTE Signal Booster For Homes & Offices Up To 2500 Sq. Ft.

Price: $299.99 USD

Our top pick for a booster for small homes and apartments is the SureCall Flare. It amplifies 3G & 4G LTE data, voice and text and improves cellular signal strength over an area of up to 2,500 sq. ft. This cell phone repeater is very easy to set up and use because its interior antenna is already built into the neat and elegant desktop signal amplifier. It reduces the problem of dropped calls and missed calls by a substantial extent and boosts 4G LTE data speeds. It covers one or two rooms of a home or small office, a cabin or a home office and supports up to 8 cellular devices at the same time.

For Larger Homes and Offices (over 2,500 square feet):

SureCall Fusion4Home Home & Building 3G 4G LTE Signal Booster For Up To 4000 Sq. Ft.

Price: $299.99 USD

SureCall Fusion4Home is an affordable cell phone repeater which enhances the signal strength over an area of up to 4,000 sq. feet. This device enhances voice, text, 3G & 4G LTE data and works with all carriers in Canada and United States.

This is certainly more powerful than SureCall EZ 4G LTE which is discontinued. This device is available in several different versions and features exterior and interior antennas, a lightning surge protector and an extended length of cable.

This device supports multiple users and devices within area at the same time - up to eight at a time. It is priced at a very good range starting at $299, which makes it a perfect for those who are looking to buy a cell phone signal extender for the first time. It gives you an average gain of 72 dB and is suitable only when outside signal is reasonably strong.

weBoost Home Room For Up To 1,500 Sq. Ft.

Price: $399.99

weBoost Home Room for up to 1,500 is an entry level kit for coverage at a desktop or within a room. It is priced at $399.99. It supports multiple devices but only when close to the desktop antenna provided. An upgrade to more powerful Panel antenna costs a bit more ($475). It provides better coverage distance from interior antenna.

When the Outside Signal is Weak:

For Larger Homes, Offices and Buildings (over 5,000 square feet):

SureCall Fusion5s Home & Building 3G 4G LTE Signal Booster For Up To 7000 Sq. Ft.

Price: $850.00

SureCall Fusion5s is priced at $850.00. This is a very good price for a device that offers an average gain of 72 dB. It is fully capable of picking up weak signals from outside and strengthening them to a considerable extent. This device works very well with all cell phones and carriers across the United States and Canada.

SureCall Fusion5s enhances cell phone reception over an area of coverage of 5,000 sq. feet to 7,000 sq. feet. That makes it suitable for large homes and small buildings. The gains achieved by this device are according to the limits set by the FCC, so you can be sure that you won’t be breaking any law with this device.

You should certainly place an order for multiple indoor antennas to take full advantage of this powerful cell phone booster for buildings and large homes.

weBoost Home & Building Signal Boosters For Up To 10,000 Sq. Ft.

Price: $549.99 to $999.99

The mid-tier weBoost Home MultiRoom for up to 5,000 sq. ft. sells for $549.99. The next one up is the weBoost Home Complete for up to 7,500 sq. ft. It is priced at $999.99. This same kit started selling in 2021 with professional installation service for residential properties. The combined booster and install combination is called weBoost Installed Home Complete. It sells for $1199.99. Now referred to, as weBoost 474445, it has the same most powerful consumer grade kit, the Home Complete. It enhances cell phone reception for practically all homes. This makes it suitable for very large homes and small office buildings. Both Home Multi-Room and Complete devices work with all cellular phone models and service providers across USA and Canada. See remaining weBoost Home & Connect wireless signal amplifiers for other options.

For Very Large Buildings (over 10,000 square feet):

Wilson Pro 70 465134 (50 Ohm) Heavy Duty Signal Booster.

Price: $899.99 USD

The Wilson Pro 70 is a comprehensive cell phone amplifier kit that comes with all the essential components such as internal and external antennas, cable and the amplifier itself.

It offers coverage for an entire build of up to 25,000 sq. feet. It gives you an average gain of +70 dB, which means it works very well even when the outside signal is weak but may not provide listed coverage area.

This device comes with a digital display on which the automatic gain control is shown clearly. This five-band amplifier works with all cell phone providers in North America.

Extra 50 Ohm in-building antenna kits can be purchased separately which include splitter and additional required cables. This allows you expand the coverage to more rooms within the house or building. Although Wilson Pro 70's MSRP is $1099.99, it is on sale for $899.99 which is very good indeed for the value you get.

Wilson Pro 70 Plus 463127 (50 Ohm) Heavy Duty Booster.

Price: $1,199.99 USD

The Wilson Pro 70 Plus is a powerful device that gives you an average gain of 70 dB. It boosts coverage over an area of up to 50,000 sq. feet. It is a complete kit and is sold with internal and external antennas, cables and a lightning surge protector.

While Wilson Pro 70 Plus MSRP is $1,799.99, it is on sale for only $1099.99. This is full value for your money when you consider that the device offers coverage to buildings with a very large built-up area. It is compatible with all devices and cell phone carriers in the USA and Canada. The device has a digital display on which you can see the automatic gain control.

Who buys the Wilson Pro 70 Plus Heavy Duty Booster? Landlords with multiple rental properties or managers of apartment complexes are among those who favor this system the most. It is also a hit with those who own large residential properties but have a problem with a weak outside signal, which hampers the cell phone connectivity within the property. It requires professional installation which we offer at an additional affordable cost for most businesses.

The Best Signal Boosters For (Very) Large Buildings (over 20,000 sq ft).

If you are in the market or signal boosters for large buildings, then you are best advised to speak to our professional installers. Our installers are highly experienced at designing custom booster solutions for large buildings and commercial properties.

Installing a cell phone booster in a very large building is not easy. It requires great attention to planning and details, as well as awareness of the surrounding environment. The installer studies the layout of the building in detail and the strength of the outside signals. You can cut costs by using taps or couplers to daisy chain the indoor antennas.

Daisy chained booster systems make a lot of sense in large buildings, but a lot of thought has to be made about the budget for the same. When you call us or submit a request for quote, we will dispatch our professional installers to your location and they will create a custom signal booster design for your building based on the area of coverage and your stated budget.

Here, you will find a list of recommendations from us on the signal boosters that we consider to be the right choice for your large building or commercial property. Each of the boosters mentioned here are proven, tried and tested. They have been successfully installed by our team in many properties across the country.

The Best Signal Boosters for Larger Buildings (25,000 to 50,000 sq. feet or more):

SureCall Force 5 2.0 Signal Booster Kit.

Price: $3,510.00 USD

The SureCall Force 5 2.0 is an advanced signal booster with many great features. What makes this device so impressive is that comes with an integrated remote monitoring system.

It can be controlled by a mobile app. You can tune the output power and the amplification manually for each of its 5 bands. The device has a maximum downlink power of 17 dBm which delivers an amazing performance even when the signal is excessive signal. It does not shut down even in the worst scenario.

The device offers coverage for up to 25k sq. ft. easily in most conditions and up to 100k sq. ft. in perfect conditions depending upon the number of interior antennas added to the system. Each of the bands is configured to function independently even in the most difficult circumstances.

The device can support numerous cell phone users within the building at the same time - at least 100 users. It is compatible with all carriers in United States and Canada. It enhances voice, text and 4G LTE data. This is one of the most sophisticated boosters you can buy right now.

$3,510 is actually a very good price for this device considering its large area of coverage and advanced features. It gives you an average gain of 72 dB, which is sufficient for most purposes, but well within the limits set by the FCC. So you don't have to worry about doing anything illegal!

Wilson Pro 1100 Booster Kit.

Price: $1,599.99 USD

The Wilson Pro 1100 Booster is one of the most powerful booster solutions from Wilson Electronics. It gives you a much stronger signal over a large area of up to 35,000 sq. ft. Designed to reach far away cell towers, its maximum uplink power surpasses the Pro 1000 by providing 25 dBm of available output.

This powerful 5 Band amplifier is compatible with all cell carriers in the United States and Canada. It provides an impressive average gain of up to +70 dB, which is large enough to cover the building or commercial property, but within the FCC limits. It does not interfere with the network in any way other than to boost the signals within the building.

The device is capable of extending the coverage to more spaces within the building with the extra 50 Ohm in-building antenna kits. These kits come with extended cables and splitters.

$1,599.99 is a good price for this booster kit. It provides full value for those who manage large buildings or own a number of rental properties or apartments within the same large building.

Business Grade Indoor Signal Boosters:

weBoost Office 100 and Office 200 Signal Boosters.

weBoost Office cell signal booster series are designed for small to medium business locations. With high downlink power, they provide signal boost to maximum simultaneous users so they can enjoy better reception, all at the same time. Available in both 50 Ohm and 75 Ohm versions for integration flexibility during installation. They can boost coverage for an area up to 35k sq. feet. A reasonably priced installed weBoost Office 200 kit is also available for turnkey white glove installation service within any type business set-up.

Commercial/Industrial Grade Indoor Signal Boosters:

Wilson Pro Enterprise Signal Boosters for up to 100k Ft²

Wilson Pro Enterprise Cell Phone Boosters, 1300R/1300 and 4300R/4300 help assess booster performance, view amplifier configuration, and make adjustments. They have easy-to-use colored LCD screen. All antenna ports are located on the same side of the unit, for easier installation. They are available in both wall mount or rack mount versions. This single cellular amplifier can boost coverage for an area up to 100k sq. feet. This is a very large and advanced commercial grade signal boosting solution specifically meant for those who have major requirements. A special feature is the extra dynamic range technology which provides continuous connectivity.

The device features the highest adjustable downlink and uplink power you can get with any of the products in this category. You can extend the coverage within the building with a 50 Ohm indoor antenna kit.

We offer a best price guarantee with this device. You are welcome to call at 1-855-846-2654 or submit a request for quote. Our team of engineers will design a custom solution for you based on your specific requirements and budgetary considerations.

Wilson Pro 1050 Two Signal Booster System (Main & Inline Boosters).

The Wilson Pro 1050 Two Signal Booster System is a special solution meant for those who have large-scale commercial requirements. It consists of a two-part booster system, the very first such device from Wilson Electronics.

The Wilson Pro 1050 consists of a "main booster" and an "inline booster". It is the first inline cell phone booster system that is approved by the FCC and by the major carriers within United States and Canada.

In-line cell phone signal booster can make up for up to 300 feet of cable. The device comes with a complete installation kit which includes cables and antennas.

This dual booster system enhances the in-building coverage by as much as 75,000 sq. ft. using this dual booster system. It gives you a downlink power of up to +15 dBm. You can extend the coverage you get with this device with a 50 Ohm indoor antenna kit that comes with it.

We offer a best price guarantee with this device. You are welcome to call at 1-855-846-2654 or submit a request for quote. Our team of engineers will design a custom solution for you based on your specific requirements and budgetary considerations.

The Best Mobile Boosters for Cars and Trucks:

What is the best mobile booster kit for cars and trucks? We stock several models of car or truck boosters in our online store. There're two types: Cradle boosters and Wireless boosters. Cradle boosters improve reception for a single cellular device such as cell phone, mobile hotspot device, etc. whereas wireless boosters improve reception for multiple such devices simultaneously.

Here's our recommendation for the best cell booster for your car or truck.

SureCall Fusion2Go Max Car Truck Cell Phone Signal Booster.

Price: $499.99 USD

SureCall Fusion2Go Max is an advanced version of the SureCall Fusion2Go Series 1.0, 2.0, amd 3.0. It is the most powerful for one, as it offers a much higher uplink power. It incorporates SureCall's Extended Range Technology (ERT) and Double Power Technology (DPT).

This device provides an uplink power of 29 dBm, compared to the older device's 21.2 dBm (Fusion2Go 2.0) and theoldest device's 17.9 dBm (Original Fusion2Go 1.0). Its exterior antenna has 4 inches height with a wider magnetic base to hold it more securely during harsh or inclement weather and stormy high speed winds. The 4 inches tall exterior antenna is quite small compared to the exterior antenna that came with the oldest version, 12 inches.

The device boosts voice, text, 3G, 4G LTE for all major carriers within United States and Canada. You get an automatic gain adjustment with this device, while the older version only offered manual gain adjustment.

Like the previous version of this device, the SureCall Fusion2Go Max is easy to install. In fact, it hardly takes five minutes to set up this car and truck booster. This device is priced at $499.99 and available in several versions to fit your type of vehicle such as a Marine Vessel or a Recreational Vehicle (RV).

The Best Mobile Boosters for RVs.

What is the worst thing that could happen when you are on a long RV trip? Losing connectivity, finding out that you can no longer access your cell signal. What will you do if you need to get in touch with someone at work urgently? Or a client calls you about something important and the connection breaks down in the middle of the conversation?

That is why you need a proper mobile booster for your RV. The FCC has set the limit on the mobile boosters for large vehicles such as RVs at an average gain of 50 dB.

The problem with this is the booster cannot cover the entire cabin of the RV with an average gain of just 50 dB. The way to get around the problem is to place the indoor antenna as close to the phone as possible or near a hotspot device. Also, make use of Bluetooth or Wi-Fi for connecting through the device for making voice calls and for internet access.

The Best Vehicle RV Cell Booster:

SureCall Fusion2Go 3.0 RV 3G 4G LTE Cell Phone Signal Booster.

Price: $449.99 USD

SureCall Fusion2Go 3.0 RV is our recommendation for the best RV mobile booster considering its power the price value. This is an incredibly powerful booster that has been tested extensively and has come out with flying colors in most of the field tests that have been conducted on it.

The device costs $449.99, which is a reasonable price for it. The booster provides extra coverage you need for your voice calls, text messages, internet data on any carrier or mobile device in USA and Canada.

This signal extender is ideal for large vehicles such as caravans, RVs and luxury buses. It can cover as much of the cabin as possible with a decent average gain, which is just below the limits set by the FCC for large vehicles.

Installation is very simple, as easy as plug and play; will take only 15 minutes of your time. Installing the device will not only improve your signal strength, it also extends the battery life for all of your devices.

Best Marine Cell Booster.

What is the best boosting solution for a ship, yacht or boat? You will want to know the answer to this question if you have a boat and like to take it out every now and then.

Even when you are on your boat or yacht you will want to stay connected to your home or office – what if there is an emergency call from your wife about something? What if a business associate has to get in touch with you urgently?

That is why you need a proper marine cell booster that keeps you connected even when you are in the open water, where the nearest cellular tower is at a fair distance away. The best marine cell phone signal boosters catch hold of the available signal, and improve it to an appreciable extent. Here's our recommendation for the best product in this category.

Shakespeare Super Halo 3G 4G LTE RV Marine Cellular Booster.

Price: $974.00 USD

The Shakespeare Super Halo is without question the best marine cellular phone signal booster out there with weather-proof exterior antenna. It is priced at $974 which is actually pretty reasonable when you consider the utility of the device.

This is an all-weather proof booster that does not shut down even in the worst scenario, such as when there is a natural disaster or an emergency situation. This makes it ideal for marine vehicles such as boats, yachts, and ships. It is also very easy to set up, takes only a few minutes of your time.

This device boosts voice, text, 3G, 4G LTE signals for all cell carriers based in United States and Canada. It helps reduce the problem of dropped calls, missed calls and lack of connectivity when you are out sailing. It can support multiple cell phone users on the boat, yacht or ship simultaneously.

What exactly does "5G ready" mean, when it comes to signal boosters?

While Carriers promote their 5G network, know that there isn't a single consumer grade 5G signal booster in the market yet, nor will it arrive anytime soon. The reason is that it is not needed. Why? Please read on...

For all practical purposes, all that we do on our smartphones and tablets is doable with 4G/LTE effortlessly as long as there's good, strong signal connectivity. Therefore, 5G is intended to complement 4G/LTE, not replace it.

In areas that have no 5G now, the cell device will automatically default to 4G/LTE that is available, and the signal boosters will ensure that connectivity is strong and consistent. Therefore, there will be no need for a 5G signal booster for consumer applications, in the consumer market - atleast for the next decade, and beyond. This is how all the 4G/LTE consumer grade signal boosters are ready and certainly going to help, in a 5G world. There's however a commercial / industrial grade 5G signal booster available to boost 5G network for business applications.

Which cell phone signal booster kit should I buy?

Among other non-technical considerations such as cost, square feet coverage needed, etc. - Amount of "Gain" and "Downlink Output Power" should be your main considerations in order to get the most bang for your buck. Greater Gain and Downlink Power are important, but in different situations.

Highest Gain Cell Phone Signal Booster.

Gain is measured in Decibels (dB). It indicates how much a signal booster can amplify the signal that it gets from exterior antenna. When outside signal is weak, you should get a booster with highest Gain output capability. The reason for this is that if you have low outdoor signal (-90 dBm RSRP or worse such as -100 dBm, -110 dBm), your signal booster will be gain constrained because the downlink output power limit will never be reached. An example of this highest gain cell phone signal booster would be this booster kit with up to 100 dB Gain.

Highest Downlink Power Cell Phone Signal Booster.

Downlink output power is measured in Decibel Milliwatts (dBm). It indicates how much amplified signal a booster can re-transmit inside. The max downlink power sets the limit on inside coverage area when amplifier has enough signal. Thus when outside signal is strong, you should get the booster with highest Downlink value which will provide maximum coverage inside. The reason for this is that if you have good outdoor signal (-80 dBm RSRP or better such as -70 dBm, -60 dBm, etc.), your signal booster will be downlink strength constrained because you're quite likely going to reach the max downlink output power of the signal booster. An example of this highest downlink power cell phone signal booster would be this booster kit with up to 16.6 dBm Downlink Power.

Conclusion.

We hope you enjoyed reading this comprehensive guide to cell phone signal boosters as much as we loved creating it. SignalBooster.com is owned and operated by the Houston, Texas-based Accessory Fulfillment Center, LLC. SignalBooster.com is a retailer, reseller, distributor and installer of signal boosters by SureCall, Wilson-Pro, weBoost, HiBoost, and other leading brands. All devices sold by us receive 60-day money back guarantee and free shipping for all orders over $100 USD within contiguous USA. We're a leading installer of cell phone booster products and have a team of certified professional installers. You may call at 1-855-846-2654 for a free consultation or submit a request for quote to get started immediately.