10' SureCall 400 Coaxial Cable with N-Male Connectors (Black Ten Feet Coax Cables)
10' SureCall 400 Coaxial Cable with N-Male Connectors (Black Ten Feet Coax Cables)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-001-10
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
10 feet SureCall 400 coaxial cable with Type N Male Connector on both ends is black in color. Sure-Call's CM-400 ultra low loss coax cable is top quality SureCall CM400 cable (SC-400) which minimizes signal loss that this Sure Call SC400 can incur. SureCall's ultra low loss coax cable provides you with the capabilities to link your signal boosters with your antenna. It is available in multiple pre-determined lengths according to your needs, and is suitable for both indoor and outdoor use. This cable is 10' length, and gives an extremely low loss of signal. SureCall Part # SC001-10. Surecall 10' SC-400 Ultra Low Loss Coax Jumper. Made of CM-400 cable with N Male connectors.
Over any distance, our black SC400 cable gives you reliable connectivity with ultra-low loss. Perfect for in-building connections, the copper-cladded aluminum conductors offer a signal you can depend on with a 50-ohm impedance. Sturdy foamed polyethylene insulation and PVC jacket in black color block signal-damaging electromagnetic interference while giving this cable both strength and flexibility, so you can rely on this SC-400 cable for almost any reason, over a wide range of temperatures from -40° to 185° F. This 10-foot length in black will aid you in joining up points a moderate distance apart, even in environments with significant interference. This length is supplied with pre-crimped type N-Male connectors on both sides.
Sure Call 400 cable is easy to install, and features type Nmale connections on both ends. Additional n-male connectors are available for purchase if needed. The 10ft. cable is weatherproof, heat shrunk, and tested for efficiency, so you can be certain you are dealing with the highest quality product on the market.
Technical Details
Rated Temperature (oF) (-40 / + 185). Rated Voltage(V) 2,500. Impedance (ohms) 50. Capacitance (pf/ft) 23.9. Conductor Copper Cladded Aluminum Conductor. Diameter (Inches) 0.108. Insulation Foamed PE Insulation. Diameter (Inches) 0.285. Jacket PVC. Outer Diameter (Inches) 0.405. UPC: 896831002166.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Data Sheet
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
