15 ft. RG-58 Coaxial Cable (SMA-Female to SMA-Male Connector) | 955815
15 ft. RG-58 Coaxial Cable (SMA-Female to SMA-Male Connector) | 955815
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 955815
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
15 feet RG58 Coax Cable with SMA-F to SMA-M Connector | weBoost 955815 by Wilson Electronics / WilsonPro.
Fifteen ft. RG-58 low-loss foam coaxial cable with SMA-Female to SMA-Male Connectors has a characteristic impedance of 50 Ohm. Please note that it causes signal loss of approx. 2.4 dB per 10 ft. Therefore, an absolute smallest length cable that is feasible must be used within a cell phone signal booster system, to ensure Net Signal Gain. UPC: 811815021179.
Smaller length cables available are:
- 6 ft. 50 Ohm cable with SMA male to SMA female connectors.
- 10 ft. 50 Ohm cable with SMA male to SMA female connectors.
For this cable to help (especially if being connected with another additional length cable, the signal amplifier must be most powerful providing maximum Gain allowed by FCC, as well as have reasonably good signal strength outside (-110 dB of signal to boost at a minimum which is equal to enable holding a wireless call conversation) to negate the loss caused by the length of this cable.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
Do you carry a male to male cable just like this one?
We do have cables with sma-male connectors in following lengths:
25 ft. cable with both sma male connectors:
https://www.signalbooster.com/products/rg58-low-loss-coax-cables-2-to-30-ft-50-ohm?variant=32901239210069
10 ft. cable with both sma male connectors:
https://www.signalbooster.com/products/rg58-low-loss-coax-cables-2-to-30-ft-50-ohm?variant=32901239078997
3 ft. cable with both sma male connectors: (low stock)
https://www.signalbooster.com/products/3-ft-rg174-cable-with-sma-male-to-sma-male-connector
If you just need to connect 2 cables with sma female connectors together, get this barrel sma male to sma male connector: (plenty in stock)
https://www.signalbooster.com/products/sma-male-to-sma-male-adapter-connector -
Is this cable compatible with television antenna cable? Will it work with VHS and UHS antenna cable?
Thanks for reaching out. This cable is 50 ohm cable and it isn't compatible with systems that require 75 ohm cable. TV systems require 75 ohm cables. Thus, we wouldn't recommend using this cable. Search for 75 Ohm cable and you should come up with a few you can use with your television cable system network.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products