20' SureCall 240 Cable w/N-Male & FME-Female connectors (White)
20' SureCall 240 Cable w/N-Male & FME-Female connectors (White)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-004-20-FN
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
20 FT. SURECALL CM240 COAXIAL CABLE (WHITE).
The twenty feet low-loss coaxial SureCall cable is ideal for use outdoors and indoors depending on the need to connect to amplifiers and antennas. A 50 Ohms FME-Female/N-Male cable, it is compatible with any 50 Ohm amplifier. Their lighter, weatherproof and flexible nature makes them the best to use when performance is critical in rooms with limited spaces. SureCall Part # SC-004-20-FN / SC00420FN / SC-00420FN and its alternate product number of same item is CM-004-20-FN / CM00420FN / CM-00420FN. Surecall 20 ft. CM240 Ultra Low Loss Coaxial Jumper Cable. Made of CELLPHONE-MATE CM-240 cable with part number CM-004-20-FN has Type FME-Female to Type N-Male connector. SureCall "SC-240 20FN". UPC: 896831002715.
Twenty feet SureCall SC240 coaxial cable with FME Female and N-Male connector is a great solution for both indoor and outdoor use. Thinner and lighter than our SC-400 type cable, this white color 20' Sure-Call SC-240 features similarly excellent signal quality, low-loss over long distances, and tough shielding to prevent interference. This 20 ft. Sure Call SC 240 cable is suitable for carrying many signals and frequencies, such as CDMA, GSM, GPRS, TDMA, and AMPS.
Thanks to a thinner-diameter design, this cable can be installed in tighter spaces without sacrificing signal quality or protection, making it perfect for either indoor or outdoor installation. The 20 feet length cable is perfect for short-distance installations. This listing is for 20ft. cable with type FME-Female connector on one end, and a type N-Male connector on other.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
Does this cable work with a WeBoost system?
Sorry, this cable has FME connector which is not usually the connector in weBoost amplifiers. If you have weBoost home system and need cable, the low loss RG11 cable with F-male connectors will most likely fit. If you have weBoost vehicle system, a cable with SMA-male connector should fit unless you have newer weBoost Drive Reach vehicle system which will work for preceding cable but will also require SMB connector to make it fit amplifier.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
