3.3 in. NMO (Non Magnetic Option) Vehicle Roof Antenna w/ 17 ft. Cable
3.3 in. NMO (Non Magnetic Option) Vehicle Roof Antenna w/ 17 ft. Cable
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-203WN
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
Wide Band 3.3 inch NMO (Non Magnetic Option) Exterior Roof Antenna for vehicle cell phone signal booster with ¾ inch mounting base and attached 17 feet cable with FME-Female connector.
Permanently mount your signal booster antenna with this 3.3 inch NMO vehicle antenna and 3/4 inch mounting base. NMO (Non-Magnetic Option) is ideal if a permanent mount is desired or your vehicle does not have a roof that allows for a magnetic antenna - such as those with an aluminum body.
Includes NMO mounting base with attached 17 ft. cable for connecting the exterior NMO antenna to outside of the vehicle. Requires a ¾ inch hole to be drilled through a metal surface with antenna outside and the mounting base inside the vehicle.
This is an omnidirectional 50 Ohm impedance wide band antenna covering 698 - 2700 MHz frequencies. Permanent mounting option - Requires 3/4" hole in vehicle sheet metal. UPC: 854328008251.
It transmits and receives signal in a 360 degree pattern covering 2G, 3G, 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies.
Mounting Base:
- All brass construction and gold-plated contact design ensure the most corrosion resistance and best power transfer available.
- 78 Rockwell Hardness brass material resists corrosion.
- Silver soldered ground lug and contact virtually eliminates RF noise or static.
NMO Antenna Specifications.
| Frequency Band (MHz) | 698-960 MHz, 1710-2700 MHz |
|---|---|
| Peak Gain On Each Freq. Band | 3.5 dBi (698 - 960 MHz) / 5.5 dBi (1710 - 1990 MHz) / 4.6 dBi (2100 - 2700 MHz) |
| Impedance | 50 Ohm |
| Radiation pattern | Omni-directional |
| Polarization | Vertical |
| Radome material | High Heat ABS |
| Maximum power | 100W |
| Connector type | FME-Female |
| Cable length | 17 ft. |
| Cable Type | RG-58U |
| Operating Temperature | -40° F to +185° F |
| Mount Type | NMO |
This NMO antenna and cable is already included in complete kit, SureCall Fusion2Go 3.0 Fleet.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Data Sheet
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
