50' RG-6 Coaxial Cable with F-Male Connector (White Fifty Feet Coax Cables)
50' RG-6 Coaxial Cable with F-Male Connector (White Fifty Feet Coax Cables)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-RG6-50
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
50 feet RG6 coaxial cable with F Male Connector is white in color. This 50' length of RG6 coax cable is extremely high quality and offers low loss of signal during transmission. It features female to male connectors. Neutral to male connectors are also available for purchase. The RG6 cable is weatherproof and heat shrunk, making it durable and suitable for both indoor and outdoor use. The white colored cable offers a pleasing look.
SureCall RG-6 coaxial cable combines high-quality conductors with tough protective shielding to ensure a clean signal over runs up to 50 feet. This 50ft. cable also comes with pre-attached standard F-Male connectors for added convenience and a strong connection at both ends, and is designed for use in systems with an impedance of 75 ohms. Great build quality means you can trust the cables you install to work reliably every time. Sure Call RG-6 cable is also flexible enough to install easily in tighter environments. The 50-feet length is best suited for runs of cable where a longer distance is needed, such as from an outside TV connection point.
The ultra low loss RG6 is rigorously tested to ensure optimal performance, so you can be sure you are using a coaxial cable that offers that least disruption to signal strength. Choose the right length cable now. Designed, assembled and tested in USA.
RG6 Quad Shield Coaxial Cable Cross-Sections:
Electrical Characteristics:
| Capacitance (pF/km) | Nom. 53 |
|---|---|
| Impedance (ohm) | 75 (±3) |
| Velocity (percentage) | Nom. 82% |
| Dielectric resistance (MΩ·km) | ≥5000 |
| Dielectric strength(KV) | 5 |
| Max.Operating Frequency (MHz) | 11000 |
| Max. Operating Voltage (KV) | 2.7 |
Mechanical and Environmental Characteristics:
| Operating Temp. (Degrees Centigrade) | -30 to +70 |
|---|---|
| Bending radius once (mm) | 42 |
| Repeated bending radius (mm) | 64 |
| Flexible application radius (mm) | 170 |
Typical Attenuation at 20 Degrees Centigrade, and Sea Level:
| Frequency (MHz) | Nominal Attenuation (dB/100 ft.) |
|---|---|
| 55 | 1.91 |
| 211 | 3.05 |
| 550 | 4.9 |
| 870 | 6.11 |
| 1000 | 6.55 |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
Is this the same cable that cell phone boosters use?
Yes, it connects to cell phone boosters that have 75 Ohm input port (Type F connector).
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
