Cel-Fi GO X smart signal booster is switchable thru an app to work on any single Canadian Carrier at a time - Rogers Wireless, Bell Mobility, Telus Mobility, SaskTel or Freedom Mobile. It is the only in-building cell phone signal booster brand and model that offers the highest 100 dB Gain allowed by IC / ISED while operating on a single Carrier network at any time.

This ingenius cellular amplifier or repeater kit boosts mobile reception over up to 15,000 sq. ft. inside any home, office, and building by up to 100dB Max Gain. Using the Cel-Fi Wave App, the boosted service provider network can easily be switched to the most desirable one based on circumstances.

CelFi GOX signal booster does not require broadband home Internet service for it to work. It is a signal booster system that uses Nextivity's Cel-Fi Smart Signal Booster technology to increase data and voice coverage significantly using already existing signals outside building or house. It takes off-air donor signal from the Macro network and relays it into the building.

As it is not a simultaneous multi-carrier device, Industry Canada (IC) does not restrict its gain to 70 dB. Cel-Fi GO X Stationary signal booster is NEMA 4 rated weather resistant and does not interfere with other wireless devices. This multi-carrier solution (requires switch using a Smartphone App to use single carrier at a time) is ideal for use in commercial properties, government buildings, agricultural settings, small manufacturing operations, rural areas, businesses, and large homes. It provides additional 30 dB gain compared to all-carrier models making it ideal for buildings where outdoor coverage is weak (-80 dBm RSRP or less than 3 bars).

It is ideal for boosting 3G, 4G, LTE signals within urban residential and business structures like small buildings, apartment complexes, and skyscrapers with extremely poor or no signals inside. It is also ideal for housings in rural and remote places such as cottages and cabins with weak signals outside and inside.

Cel-Fi GO-X with +100dB gain for Rogers, Bell, Telus, SaskTel or Freedom Mobile.

Easy-to-deploy, cost efficient, and boasting an additional 30-40 dB on similar signal boosters, the Cel-Fi GO-X from SignalBooster.com is the only 100 dB cell signal booster for Rogers Wireless, Bell Mobility, Telus Mobility,SaskTel or Freedom Mobile. This additional gain means improved cell signal strength, much faster data speeds, and a lot wider coverage area. It greatly enhances 3G, 4G, and LTE cell service for wireless devices in your home, office, or other building with up to 15,000 ft. indoor space. And there's better monitoring with the Cel-Fi Wave App for android and iOS devices, which makes installation and monitoring easy. With the Cel-Fi Wave App, users can connect to the device via Bluetooth to optimize and monitor the Cel-Fi GO-X and view diagnostic data, signal strength, signal quality, and gain.

The introduction of the Cel-Fi GO-X means no more frustration; being forced to put up with undelivered text messages, slow data rates, and dropped calls due to weak signal. Cell signal is amplified by the Cel-Fi GO-X cell signal booster for Rogers Wireless, Bell Canada, Telus Mobility, SaskTel or Freedom Mobile, only one carrier at a time - to deliver reliable and improved cell signal coverage. And, with the Cel-Fi GO-X there's no need for a wired internet connection, unlike Network Extenders offered by some carriers.

Everything you require for installation comes complete in the booster kit when you purchase a Cel-Fi GO-X cell phone signal amplifier from SignalBooster.com, and this includes extras like an antenna mount and a lightning surge protector, both of which will assist in getting your booster fully operational. The installation manual for the Cel-Fi GO-X cell phone signal booster is thorough and easy-to-understand, and in no time at all you will be enjoying the benefits of your new cell signal amplifier.

As an added bonus, you receive Lifetime Technical Support when you purchase a Cel-Fi GO-X phone booster kit from SignalBooster.com. Our highly trained technicians will ensure that that you receive our second-to-none customer service, that you get the professional installation you deserve (if required, for an add'l cost), and that the set-up and performance of your Cel-Fi GO-X is the absolute best. So please don't hesitate to contact SignalBooster.com should you have any queries whatsoever.

About the Cel-Fi GO-X Home and Office Indoor Signal Booster Kit.

With the CelFi GOX signal booster kit, cellular reception can be boosted in buildings of up to 15,000 ft.². The booster with two panel antennas allows for signal to be boosted in open-space buildings of up to 15,000 ft., or up to 3,000 ft. in up to two floors in an office or typical home situation. This powerful technology can dramatically improve data and voice coverage in up to 2 bands for LTE, 3G, and 4G. This signal booster kit has been designed specifically to improve both indoor cellular coverage when only one external signal bar is available.

The Cel-Fi GO-X is very cost-effective and easy for an installer to employ. And, with the Cel-Fi WAVE platform, this innovative signal booster is easily monitored and optimized; and it is simple to switch carriers. There is no need to be connected to Wi-Fi, and there are no monthly fees. Because the Cel-Fi GO-X is not a multicarrier broadband device, it is not restricted by the FCC to 70 dB gain, so this powerful device provides a gain of a whopping 100 dBs.

Important: Outdoor Signal Strength Required.

It is important to note that this kit does not require Internet access and does not use your Internet Service Provider (ISP) bandwidth. However, in order for the Cel-Fi GO-X cell phone signal booster from SignalBooster.com to work effectively, you must be able to access at least 1 or 2 bars of reliable outdoor signal. The Cel-Fi GO-X cell phone signal booster works by amplifying and bringing the signal indoors, resulting in the same signal strength indoors as outdoors. For areas that suffer from extremely poor outdoor signal, the new high gain Cel-Fi LPDA Antenna is available for purchase, separately.

Which parts do the respective in-building signal booster kits include?

Per Nextivity, Inc., the manufacturer of Cel-Fi, only original Cel-Fi antennas must be used. Therefore, SignalBooster.com offers authentic Cel-Fi exterior and interior antennas bundled with our kits as follows:

1st Option: Indoor Ceiling-Mounted Dome Antenna Kit.

This Cel-Fi GO-X cell signal booster from SignalBooster.com comes complete with a dome antenna, which is a ceiling mounted antenna that transmits signals in all directions. For this reason, the dome antenna should be installed as close as possible to the center of the coverage area. Because dome antennas do not support multilevel coverage, they should be installed throughout a building to ensure adequate coverage.

It is important to note that a dome antenna can only be used if the antenna can be mounted to the ceiling and you have access to the back side of the ceiling in order to run the cable and install the antenna. You will be able to do this if you have a loft or crawl-space above the ceiling or if the building has ceiling tiles. (If you don't have access to the back of the ceiling, we strongly recommend that you use a panel antenna). The powerful Cell-Fi Go-X cell phone signal booster is capable of covering up to 1,500 ft. on a single floor or up to 10,000 ft. in open space.

Everything you need for safe, easy, and complete installation is included in the Cel-Fi GO-X kit including two (2) lengths of 30-foot ultra-low-loss cable, two (2) SMA to N-type adapters, lightning surge protector, grounding kit, and exterior antenna mounting pole.

2nd Option: Indoor Ceiling or Wall-Mounted Panel Antenna Kit.

This Cel-Fi GO-X wall-mounted antenna booster from SignalBooster.com comes complete with one panel antenna. With wall-mounted panel antennas there are no cables to be run through walls. The signal from wall-mounted panel antennas is transmitted in the direction the antenna is facing. These panels have a narrow beam-width and direct signal in a specific direction. Note that even though panel antennas are easier to install than dome antennas, we still recommend using a dome antenna if you have access to the back of the ceiling in order to run the cable and it is possible to mount the antenna to the ceiling. You will be able to do this if you have a crawl-space above the ceiling, a loft, or the building has ceiling tiles. This powerful Cel-Fi GO-X cell phone signal booster from SignalBooster.com is capable of covering up to 1,500 ft. on a single floor of an office or home, or up to 10,000 ft. in open space.

Everything you need for safe, easy, and complete installation is included in the Cel-Fi GO-X kit including two (2) lengths of 30 ft ultra-low-loss cable, two (2) SMA to N-type adapters, lightning surge protector, grounding kit, and exterior antenna mounting pole.

3rd Option: Two (2) Indoor Ceiling-Mounted Dome Antenna Kit.

This Ceiling-Mounted Dome Antenna Kit from SignalBooster.com complete with two dome, ceiling-mounted antennas which transmit cell signal equally in all directions. For this reason, the dome antennas should be installed as close as possible to the center of the coverage area.

It is important to note that dome antennas can only be used if the antenna can be mounted to the ceiling and you have viable access to the back side of the ceiling in order to run the cable and install the antenna. You will be able to do this if you have a loft or crawl-space above the ceiling or the building has ceiling tiles. If you don't have access to the back of the ceiling, we strongly recommend that you use a panel antenna. This powerful Cel-Fi GO-X cell phone signal booster from SignalBooster.com is capable of covering up to 3,000 ft. on two floors or up to 15,000 ft. in open space.

Everything you need for safe, easy, and complete installation is included in the Cel-Fi GO-X kit including three (3) lengths of 30-foot ultra-low-loss cable, two (2) SMA to N-type adapters, a 2-way signal splitter, 2 ft. ultra low loss jumper cable, lightning surge protector, grounding kit, and exterior antenna mounting pole.

4th Option: Two (2) Indoor Ceiling or Wall-Mounted Panel Antenna Kit.

This wall-mounted Panel Antenna Kit from SignalBooster.com comes complete with two panel antennas. With wall mounted panel antennas there are no cables to be run through the walls. The signal from wall mounted panel antennas is transmitted in the direction the antenna is facing. Note that even though panel antennas are easier to install than dome antennas, we still recommend using a dome antenna if you have access to the back of the ceiling in order to run the cable and it is possible to mount the antenna to the ceiling. You will be able to do this if you have a crawl-space above the ceiling, a loft, or the building has ceiling tiles. This powerful Cel-Fi GO-X cell phone signal booster from SignalBooster.com is capable of covering up to 3,000 ft. on two floors in an office or home, or up to 15,000 ft. in open space.

Everything you need for safe, easy, and complete installation is included in the Cel-Fi GO-X kit including three (3) lengths of 30 ft ultra-low-loss cable, two (2) SMA to N-type adapters, a 2-way signal splitter, 2 feet ultra low loss jumper cable, lightning surge protector, grounding kit and exterior antenna mounting pole.

5th Option: Three (3) Indoor Ceiling-Mounted Dome Antenna Kit.

This Ceiling-Mounted Dome Antenna Kit from SignalBooster.com comes complete with three dome, ceiling-mounted antennas which transmit cell signal equally in all directions. For this reason, the dome antennas should be installed as close as possible to the center of the coverage area.

It is important to note that dome antennas can only be used if the antenna can be mounted to the ceiling and you have viable access to the back side of the ceiling in order to run the cable and install the antenna. You will be able to do this if you have a loft or crawl-space above the ceiling or the building has ceiling tiles. If you don't have access to the back of the ceiling, we strongly recommend that you use a panel antenna. This powerful Cel-Fi GO-X cell phone signal booster from SignalBooster.com is capable of covering up to 3,000 ft. on two floors or up to 15,000 ft. in open space.

Everything you need for safe, easy, and complete installation is included in the Cel-Fi GO-X kit including four (4) lengths of 30-foot ultra-low-loss cable, three (3) SMA to N-type adapters, a 3-way signal splitter, 2 ft. ultra low loss jumper cable, lightning surge protector, grounding kit and exterior antenna mounting pole.

6th Option: Three (3) Indoor Ceiling or Wall-Mounted Panel Antenna Kit.

This wall-mounted Panel Antenna Kit from SignalBooster.com comes complete with three panel antennas. With wall mounted panel antennas there are no cables to be run through the walls. The signal from wall mounted panel antennas is transmitted in the direction the antenna is facing. Note that even though panel antennas are easier to install than dome antennas, we still recommend using a dome antenna if you have access to the back of the ceiling in order to run the cable and it is possible to mount the antenna to the ceiling. You will be able to do this if you have a crawl-space above the ceiling, a loft, or the building has ceiling tiles. This powerful Cel-Fi GO-X cell phone signal booster from SignalBooster.com is capable of covering up to 3,000 ft. on two floors in an office or home, or up to 15,000 ft. in open space.

Everything you need for safe, easy, and complete installation is included in the Cel-Fi GO-X kit including four (4) lengths of 30 ft ultra-low-loss cable, three (3) SMA to N-type adapters, a 3-way signal splitter, 2 ft. ultra low loss jumper cable, lightning surge protector, grounding kit and exterior antenna mounting pole.

7th Option: Four (4) Indoor Ceiling-Mounted Dome Antenna Kit.

This Ceiling-Mounted Dome Antenna Kit from SignalBooster.com comes complete with four dome, ceiling-mounted antennas which transmit cell signal equally in all directions. For this reason, the dome antennas should be installed as close as possible to the center of the coverage area.

It is important to note that dome antennas can only be used if the antenna can be mounted to the ceiling and you have viable access to the back side of the ceiling in order to run the cable and install the antenna. You will be able to do this if you have a loft or crawl-space above the ceiling or the building has ceiling tiles. If you don't have access to the back of the ceiling, we strongly recommend that you use a panel antenna. This powerful Cel-Fi GO-X cell phone signal booster from SignalBooster.com is capable of covering up to 3,000 ft. on two floors or up to 15,000 ft. in open space.

Everything you need for safe, easy, and complete installation is included in the Cel-Fi GO-X kit including five (5) lengths of 30-foot ultra-low-loss cable, four (4) SMA to N-type adapters, a 4-way signal splitter, 2 ft. ultra low loss jumper cable, lightning surge protector, grounding kit and exterior antenna mounting pole.

8th Option: Four (4) Indoor Ceiling or Wall-Mounted Panel Antenna Kit.

This wall-mounted Panel Antenna Kit from SignalBooster.com comes complete with four panel antennas. With wall mounted panel antennas there are no cables to be run through the walls. The signal from wall mounted panel antennas is transmitted in the direction the antenna is facing. Note that even though panel antennas are easier to install than dome antennas, we still recommend using a dome antenna if you have access to the back of the ceiling in order to run the cable and it is possible to mount the antenna to the ceiling. You will be able to do this if you have a crawl-space above the ceiling, a loft, or the building has ceiling tiles. This powerful Cel-Fi GO-X cell phone signal booster from SignalBooster.com is capable of covering up to 3,000 ft. on two floors in an office or home, or up to 15,000 ft. in open space.

Everything you need for safe, easy, and complete installation is included in the Cel-Fi GO-X kit including five (5) lengths of 30 ft ultra-low-loss cable, four (4) SMA to N-type adapters, a 4-way signal splitter, 2 ft. ultra low loss jumper cable, lightning surge protector, grounding kit and exterior antenna mounting pole.

Outdoor Directional Antenna + Mounting Pole.

All stated above Cel-Fi GO-X options from SignalBooster.com include a Cel-Fi Directional Outdoor Antenna and Mounting Pole. Pointing the directional outdoor antenna in the direction of the nearest tower will improve the signal quality and the signal strength.

Cel-Fi WAVE App.

By downloading the Cel-Fi WAVE App you can monitor and control your GO-X with your android or iOS device, giving you complete control over the signal booster. Besides viewing detailed diagnostic data, you can choose the bands to be amplified by the device and the carrier you wish to boost. You will, of course, need Internet access to be able to download the WAVE app.

Features of the Cel Fi WAVE App:

• Using the Cel-Fi WAVE app you get to choose the carrier to be amplified by your Cel-Fi GO-X signal booster; meaning you can switch between Rogers, Bell, Telus, SaskTel or Freedom Mobile.
• You can help determine the ideal external antenna location by running an "Antenna Position Test".
• You can clearly see how much the signal is being amplified by the Cel-Fi GO-X.
• You will be able to see which bands the Cel-Fi GO-X has located signal on.
• At any time you can view the diagnostic data relating to the performance of your Cel-Fi GO-X.
• For troubleshooting help from our customer support team you can send a log of the performance of your signal booster.

Important Note:

Provided you have usable and reliable 3G, 4G, or LTE outside signal, you should experience no problems at all using the Cel-Fi GO-X signal booster.

Testing Your Outdoor Signal.

With the Cel-Fi GO-X it is critical that you have one or two bars of usable, reliable outdoor cellular signal to be brought indoors and amplified. So, before you purchase the Cel-Fi GO-X cellular signal booster you should have your external signal tested. If you can achieve 1 to 2 bars of usable, reliable external cellular signal then that signal can be amplified by the Cel-Fi GO-X and brought indoors. It is highly unlikely that you will be able to achieve more bars indoors than you have outside. It is important to remember that signal bars are not just strength - they also show the quality of the signal. When you boost signal it increases the strength, but the quality is not increased.

With additional accessories and the downloadable Cel-Fi WAVE, this smart NEMA 4-Certified signal booster can also be used in a stationary vehicle such as a parked RV. The tough design of the Cel-Fi GO-X means this booster can handle outdoor installation because it is weather resistant against water, dirt, and dust.

How to Know Which Style of Indoor Antenna to Purchase.

• Dome Antenna: Because a dome antenna spreads the signal equally in all directions it should be installed as close as possible to the center of the area you're trying to cover. Note that you need viable access to the back side of the ceiling surface in order to run the cable if you're going to install a dome antenna. This type of antenna will work if you have a crawl space, loft, or ceiling tiles.
• Panel Antenna: With a panel antenna, the signal is directed in the direction the antenna is pointing, which means it can be installed on a wall. If you don't have easy access to the back side of your ceiling then a panel antenna can be used.

You can expand the coverage area by using the two interior antenna booster kit, as provided in option 3 and option 4.

Benefits of the Cel Fi Go-X Home and Office Cell Phone Signal Booster.

• Works for all cell phones & cellular devices (from 1 carrier at any time).
• No monthly fees and no broadband Wi-Fi service required.
• Industry-leading design and performance by Nextivity Cel-Fi.
• Complete signal booster kit with chosen antenna combination: All parts included and easy installation instructions included.
• Boosts 3G and 4G LTE signals in any type structure - Home, Office, Apartment, Building, Cabin, or Warehouse.

Stronger Signal.

Todays cell phone users expect a lot more than dropped calls and painfully-slow streaming. We live in a fast-paced world that is always "on", and the Cel-Fi GO-X cell phone signal booster has been specifically designed to enhance the cellular signal in your home and office. No more slow connections, dropped calls, and lost texts: these all disappear with powerful signal amplification from the Cel-Fi GO-X signal booster. All mobile users within your home or office building can stay reliably connected, without interruption, with this powerful signal booster.

Signal Gain of a Whopping 100dB.

With the commercial grade Cel-Fi GO-X cellular signal booster, your home and office can stay connected with the fastest available cellular signal. Capturing and amplifying signal for all devices operating on our top carriers Rogers, Bell, Telus, SaskTel or Freedom Mobile (one carrier at any given time), the Cel-Fi GO-X delivers good, reliable coverage, with no interference.

The Ideal Signal Booster Bundle for Commercial Properties.

The Cel-Fi GO-X wireless signal booster is NEMA 4 Rated and comes complete with antennas - including kit with two panel antennas, the perfect solution for hallways and high ceilings. The panel antennas of this signal booster amplify signal in smaller areas, providing reliable transmission and keeping devices connected each and every day in your office or home situation.

Easy to Install and Easy to Maintain.

The Cel-Fi GO-X cellular signal booster will instantly strengthen the existing LTE, 3G or 4G service in your building. In just five easy set-up steps, cell phone users in your home or office building will be enjoying reliable communications.

1. The donor antenna is installed.
2. The server antenna is installed.
3. The signal booster is mounted close to a power outlet.
4. Both antennas (donor and server) are connected to the unit.
5. Plug in and you're connected.

The Cel-Fi GO X can be installed by persons who are comfortable running cabling and doing simple home repairs. You might however consider asking a friend or finding a local electronics installer or handyman. Or reach out to us with details for a quote to install Cel-Fi signal booster.

Choose Your Carrier - Multi-carrier Support with Carrier Switching.

Besides achieving reliable signal for your home or office building, one of the reasons for the popularity of the multi-band Cel-Fi GO-X cellular signal booster is that it is compatible with your choice of carrier. This powerful cell signal repeater locates your carrier's bands and delivers a massive 100 dB signal gain.

In Conclusion.

When it comes to commercial buildings, the Cel-Fi GO-X cellular signal booster is the only sure way to maintain reliable cellular signal for your business. The Cel-Fi GO-X has become today's industry standard for keeping businesses connected. This powerful wireless cell signal booster ensures that your commercial property, whether it be a government entity, small manufacturing operation, agricultural business, or similar, will enjoy reliable connectivity regardless how far your construction may be from a cell tower.

With the Cel-Fi GO-X signal booster being multi-user with multi-carrier support, and with the ability to switch carriers via the Cel-Fi WAVE app, this powerful little wireless booster puts an end to undelivered text messages, dropped calls, slow streaming, and data dead zones in offices, hospitals, homes, industrial facilities, retail outlets, outdoor facilities, and warehouses. No more searching for reception or waiting for screens to load, no more problems streaming video or sending instant text messages and emails, no more painfully-slow Internet; and you can use the Cel-Fi WAVE app for updates.

The Cel-Fi GO-X cellular signal booster is today's leader in voice and data amplification, and top cellular carriers like Rogers Wireless, Bell Mobility, Telus Mobility, SaskTel or Freedom Mobile are promoting their best service by encouraging users to allow this indoor signal booster to capture and strengthen their signal. IC approved and network safe, the Cel-Fi GO-X signal booster will amplify your multiband cellular signal up to a massive 100 dB. Capable of filtering through signal bands, this powerful signal booster enhances your own carrier's signal, delivering uninterrupted data and voice. And, should you decide to switch carriers, simply use the Cel-Fi WAVE app to update.

Note that this model Cel-Fi GO X can only boost signal for one carrier at a time, as stated and explained above. If users in the building use multiple networks simultaneously, multiple Go-X kits can be purchased or a simultaneous multi-carrier cell booster can be bought.

Coverage.

The coverage area of the Cel-Fi signal amplifier kit depends on the signal strength at the location where the outdoor antenna is positioned and the number of indoor antennas it is paired with.

Outdoor Signal	Estimated coverage area
Strong (5 bars)	up to 15,000 square feet
Medium signal (3-4 bars)	up to 10,000 square feet
Weak signal (1-2 bars)	up to 5,000 square feet

 

How many antennas are required?

In general, the coverage area of a system increases with the number of antennas used. Signal does not pass through walls and air that easily, so adding antennas helps expand the coverage of a signal amplifying kit.

As a general rule, one antenna should be installed for every 750 to 1000 square feet of space in a typical office or home that is split into smaller spaces. For more open environments, including warehouses or open office floors, one antenna is needed for every 1,500 to 2,000 square feet.

Cel Fi Go X Signal Booster Contents:

• Cel-Fi Go X Amplifier.
• Power Supply (15 Volt, 1.5 Amp).
• Quick Start Guide.

Option 1: Yagi Outside Antenna & 1 Dome Inside Antenna Kit Also Includes:

(GO X Bundle #1)

• Directional Outdoor Yagi Antenna (A32-V32-101).
• Omni-Directional Indoor Dome Antenna (A11-V43-101).
• Qty. 2 x 30 ft. SC400 Low-Loss Coaxial Cable with N-Male Connectors (SC-001-30).
• Qty. 2 x SMA-male to N-Female Pigtail Adapter (SC-CN-07).

Option 2: Yagi Outdoor Antenna & 1 Panel Indoor Antenna Kit Also Includes:

(GO X Bundle #3)

• Directional Outdoor Yagi Antenna (A32-V32-101).
• Directional Indoor Panel Antenna (A52-V32-101).
• Qty. 2 x 30 ft. SC400 Low-Loss Coaxial Cable with N-Male Connectors (SC-001-30).
• Qty. 2 x SMA-male to N-Female Pigtail Adapter (SC-CN-07).

Option 3: Yagi Outside Antenna & 2 Dome Inside Antenna Kit Also Includes:

(GO X Bundle #2)

• Directional Outdoor Yagi Antenna (A32-V32-101).
• 2x Omni-Directional Indoor Dome Antenna (A11-V43-101).
• Qty. 3 x 30 ft. SC400 Low-Loss Coaxial Cable with N-Male Connectors (SC-001-30).
• Qty. 2 x SMA-male to N-Female Pigtail Adapter (SC-CN-07).
• Signal 2-Way Splitter to install 2 interior antennas (SC-WS-2).
• 2 ft. ultra low loss 50 Ohm jumper cable with N-Male connectors (SC-001-02).

Option 4: Yagi Outdoor Antenna & 2 Panel Indoor Antenna Kit Also Includes:

(GO X Bundle #4)

• Directional Outdoor Yagi Antenna (A32-V32-101).
• 2x Directional Indoor Panel Antenna (A52-V32-101).
• Qty. 3 x 30 ft. SC400 Low-Loss Coaxial Cable with N-Male Connectors (SC-001-30).
• Qty. 2 x SMA-male to N-Female Pigtail Adapter (SC-CN-07).
• Signal 2-Way Splitter to install 2 interior antennas (SC-WS-2).
• 2 ft. ultra low loss 50 Ohm jumper cable with N-Male connectors (SC-001-02).

Option 5: Yagi Outside Antenna & 3 Dome Inside Antenna Kit Also Includes:

• Directional Outdoor Yagi Antenna (A32-V32-101).
• 3x Omni-Directional Indoor Dome Antenna (A11-V43-101).
• Qty. 4 x 30 ft. SC400 Low-Loss Coaxial Cable with N-Male Connectors (SC-001-30).
• Qty. 2 x SMA-male to N-Female Pigtail Adapter (SC-CN-07).
• Signal 3-Way Splitter to install 2 interior antennas (SC-WS-3).
• 2 ft. ultra low loss 50 Ohm jumper cable with N-Male connectors (SC-001-02).

Option 6: Yagi Outdoor Antenna & 3 Panel Indoor Antenna Kit Also Includes:

• Directional Outdoor Yagi Antenna (A32-V32-101).
• 3x Directional Indoor Panel Antenna (A52-V32-101).
• Qty. 4 x 30 ft. SC400 Low-Loss Coaxial Cable with N-Male Connectors (SC-001-30).
• Qty. 2 x SMA-male to N-Female Pigtail Adapter (SC-CN-07).
• Signal 3-Way Splitter to install 2 interior antennas (SC-WS-3).
• 2 ft. ultra low loss 50 Ohm jumper cable with N-Male connectors (SC-001-02).

Option 7: Yagi Outside Antenna & 4 Dome Inside Antenna Kit Also Includes:

(GO X Bundle #5)

• Directional Outdoor Yagi Antenna (A32-V32-101).
• 4x Omni-Directional Indoor Dome Antenna (A11-V43-101).
• Qty. 5 x 30 ft. SC400 Low-Loss Coaxial Cable with N-Male Connectors (SC-001-30).
• Qty. 2 x SMA-male to N-Female Pigtail Adapter (SC-CN-07).
• Signal 4-Way Splitter to install 4 interior antennas (SC-WS-4).
• 2 ft. ultra low loss 50 Ohm jumper cable with N-Male connectors (SC-001-02).

Option 8: Yagi Outdoor Antenna & 4 Panel Indoor Antenna Kit Also Includes:

(GO X Bundle #6)

• Directional Outdoor Yagi Antenna (A32-V32-101).
• 4x Directional Indoor Panel Antenna (A52-V32-101).
• Qty. 5 x 30 ft. SC400 Low-Loss Coaxial Cable with N-Male Connectors (SC-001-30).
• Qty. 2 x SMA-male to N-Female Pigtail Adapter (SC-CN-07).
• Signal 4-Way Splitter to install 4 interior antennas (SC-WS-4).
• 2 ft. ultra low loss 50 Ohm jumper cable with N-Male connectors (SC-001-02).

Specifications.

Supported Phones.	Cell Phones, Hotspots, and any Device that uses Cellular Data.
Uplink Frequencies.	Band 2, 1850-1910 MHz; Band 4, 1710-1755 MHz; Band 5, 824-849 MHz; Band 12, 699-716 MHz; Band 13, 777-787 MHz.
Downlink Frequencies.	Band 2, 1930-1990 MHz; Band 4, 2110-2155 MHz; Band 5, 869-894 MHz; Band 12, 729-746 MHz; Band 13, 746-756 MHz.
Max Gain.	100 decibels (dB).
Power supply.	In-Car Charger Included.
Antenna Connectors.	SMA-Female.
Power.	9.6 to 16.5V, 2A current draw, 16W nominal power consumption.
Amplifier Dimensions.	10.73 x 3.8 x 1.71 in / 27.25 x 9.65 x 4.35 cm.
Weight (Amplifier Only).	1.87 lbs / 0.85 kgs.
Manufacturer's Warranty Period.	Two years.

 

Cable length customization.

For most practical purposes, included cable lengths will suffice for installation. However, in rare situations longer cable(s) may be needed due to very long distance between antenna, and signal amplifier unit. Secondly, in some cases where signal that exterior antenna can capture happens to be very weak to provide enough interior improved coverage space, a customized shorter cable will be best to minimize signal loss. The reason for this is that cables incur signal loss so longer the cable, more the loss of signal incurred. Therefore, see below for optional longer or shorter custom cable purchase suggestion to facilitate installation and/or better performance.

Optional cable purchase (not required):

Kits include 30 ft. LMR400 cables to connect antennas to booster. For peak performance, always use shortest cables possible for least signal loss. Therefore, if different size cable(s) needed, buy different size LMR-400 cable(s) separately.