An item you're pre-ordering is on backorder so it will take few days to ship - are you sure you want to proceed to order it?
CloseDC/DC Vehicle Power for 5V weBoost Drive Reach Amplifier | 850020
DC/DC Vehicle Power for 5V weBoost Drive Reach Amplifier | 850020
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 850020
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
DC/DC Vehicle Power Adapter for 5V Drive Reach Amplifier | weBoost 850020 by Wilson Electronics / WilsonPro.
weBoost DC/DC Vehicle Power Adapter 5V/4.5A with DC Jack. Compatible with Wilson Pro, and 5V weBoost Drive Reach series such as Drive Reach (470154), Drive Reach OTR (472154), Drive Reach RV (470354) & RV Extreme, Drive Reach Marine (470154-MARINE) & Marine Extreme, etc.
Please note: This is for 5V Drive Reach amplifiers and it has a USB port. If you need for 12V Drive Reach amplifier, you must buy part # 850029. The latter part number 850029 has the USB port replaced with a physical switch that clearly shows if the amp is switched on or off. This part # 850020 (this purchase) is for the 5V Reach Booster, and the PN 850029 (not this purchase) is for the 12 V Reach booster. They are not compatible with each other. When you look at the booster where the power supply plugs into it, there's a line and dashes plus states 5V or 12V. Buy accordingly:
Compatible with 5V Drive Reach boosters only. Not compatible with the newer 12V Drive Reach models. The CLA Power Supply will work with the following:
- Drive Reach 5V.
- Drive Reach RV 5V.
- Drive Reach OTR 5V.
- Drive Reach Fleet 5V.
- Drive Reach OTR Fleet 5V.
This replacement power supply cord or cable helps power the mobile cellular amplifier using a standard 12 volts power jack or power outlet in any car, truck, rv or boat. This weBoost Drive Reach standard car adapter (not hard wired) has DC/DC 5V/4A DC Plug - 30W switching type plug with cable. It has been designed for use with weBoost Drive Reach car cellular amplifier kit. It comes with 11.5 ft. cable.
Note: This We Boost replacement power supply adapter (UPC: 810005960533) is already included in older 5V complete wireless booster kits, weBoost Drive Reach (470154), Drive Reach OTR (472154), Drive Reach RV (470354) & Drive Reach RV Extreme, Drive Reach Marine (470154-MARINE) & Drive Reach Marine Extreme, etc.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
Will your 850020 DC/DC Power Supply work with my HP ProBook 4530s?
Sorry you must check the power requirement for your device because we're not familiar with that device. This power supply was designed for a completely different device (specific model vehicle cellular amplifier).
This car power adapter offers 6 Volts and 2 Amps output - It that what your device needs? You have to check at your device's power input connector port.
One thing we can tell for sure is that even if your device needs less than 2 Ampere, it will work fine because electronics absorb as much amp as needed to charge or operate, and ignore the rest so no problem there. But the most important number is this - does it require exactly 6 Volts?
If not, please contact your device manufacturer for correct power supply part number for charging, or operating their device safely.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
