Mini Magnet Mount Antenna w/ 10 ft. LMR 100 Cable & SMB connector
Mini Magnet Mount Antenna w/ 10 ft. LMR 100 Cable & SMB connector
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 314418
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Magnet Car Antenna with SMB Connector | weBoost 314418 by Wilson Electronics.
Mini magnetic base mounted antenna for cars, vans, SUVs, trucks and RVs is four inches in height. It has attached 10 feet long LMR100 low loss coaxial cable. It has 50 Ohm impedance. It terminates in a snap-on SMB connector which fits many in-vehicle cell phone signal booster kits such as "weBoost Drive Reach" and "weBoost Drive Reach Fleet" by Wilson Electronics. Unlike SMA or FME connectors that "screw-on", SMB connector "snaps-on" into place.
High strength magnet base vehicle cellular donor antenna for auto, car, pickup truck, RV, SUV works omnidirectionally catching wireless signals from all directions. Installation is simple: Place this mag. mount antenna on roof of vehicle where it will stick firmly with its strong magnetic base. This antenna will work with any multi-user vehicle cell phone boosters that require SMB connection.
SMB connectors (SubMiniature version B) are coax RF connectors that are smaller than SMA connectors. They feature a snap-on coupling for easy snap-on installation instead of typical treaded roll-up and tighten connectors. They offer excellent electrical performance from DC to 4 GHz.
Installation:
Identify a location on the top of your vehicle that is near the center of the roof. Place atleast 12 inches away from any other antennas and from any windows (including sun roofs). Clean the surface where you will place the outside antenna. Mount the outside antenna by placing on top of vehicle. NOTE: For aluminum roofs, use the included adhesive disk to secure outside antenna in place.
How can the cable can be routed with different vehicles?
The cable is strong enough that it may be shut in most vehicle doors without damaging the cable.
- Car/ Sedan: Cable routed into rear side door.
- SUV/ Van/ Hatchback: Cable routed into top of hatchback door.
- Truck: Cable routed into side door.
- NOTE: When going through car wash, remember to remove your antenna.
Features:
- Works on all worldwide cellular bands for voice and 4G data: LTE/ CDMA/ GSM/ UMTS/ AWS.
- High performance for all cellular repeaters and boosters.
- Supports 4G LTE, 3G & 2G.
- Designed for exterior vehicle installation.
- High efficiency & compact low profile design that blends into any vehicle type.
- Rugged & waterproof for all weather operation.
- Simple install.
- Ground plane independent.
- Included 10 ft. LMR-100 cable terminates in a SMB Connector.
- 2-year warranty.
Highlights:
- Covers all 4G 700 - 2700MHz cellular frequencies All modes, voice and data.
- All M2M applications.
- High gain signal output surpasses others this size.
- Install instantly on any steel surface (required).
- Portable and easy to store.
- Outdoor rated waterproof.
- Great for cars and trucks.
- Connects to cellular boosters and modems Assembled in USA.
Specifications:
| Frequency Band (MHz) | 700-800 | 824-894 | 1710-1880 | 1850-1990 | 2110-2700 |
|---|---|
| Mast | Metal Mast |
| Mount Type | Rare Earth Magnet |
| Peak Gain (dBi) | ~1.7 | ~2.1 | ~2.2 | 3.1 | 1.4 |
| Impedance (Ohm) | 50 |
| Polarization | Vertical |
| Radiation Pattern | Omni-Directional |
| Max Input Power | 50W |
| Cable Type (ft.) | LMR-100 |
| Cable Length (Feet) | 10 |
| Connector | SMB Female |
| Water Resistance | IPX Weather Rated |
| Substance Compliance | RoHS |
| UPC | 810005960526 |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
