Multistage GPS/Global Navigation Arrestor – 1.1-1.7GHz Pass – N(f) to N(f) – +5Vdc Pass

Multistage GPS/Global Navigation Arrestor – 1.1-1.7GHz Pass – N(f) to N(f) – +5Vdc Pass

$199.99 USD

Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.

Free Lifetime Support. SKU / Model: FPLNFNFBP05

Call for FREE consultation:

1(855)846-2654

Need installation quote, or help with designing a custom solution? Submit a request for quote.

Description
Reviews
Questions & Answers
Make An Offer
Warning

Description

Product Description

Multistage GPS/Global Navigation Arrestor – 1.1-1.7GHz Pass – N(f) to N(f) – +5Vdc Pass. Made in USA.

This is a Satellite Navigation Fine Protector. It is Multistage Lightning Arrestor. It has type N connectors. GPS – L1, L2, L5 Galileo, EGNOS WASS, GLONASS.

Features:

Very Low Let-Through Voltage.
Frequency 1.10GHz – 1.70GHz.
Excellent RF Performance.
DC Pass for Amplified Antennas.
30kA Surge Protection.
Rugged and Waterproof.
Bulkhead Grounding.
L-Bracket and Wire Lug Available.

Transient Specifications (1.2X50μs Voltage / 8X20μs Current waveform).

Response Time: 10ns.
Maximum Transient (Imax): 30kA 1x.
Multiple Strike (IN): 20kA 10x.

Specifications:

Part Number	FPLNFNFBP05
Product Family	FPL.
Connector Type	N (Female), N (Female).
Frequency Range	1.1 GHz - 1.7 GHz.
DC Pass	Yes.
Nominal Impedance	50 Ohm.
Through Current	2.5 Amp.
DC Thru-Resistance	- 150 MilliOhm typical
Temperature Range	-50 degrees Centigrade to +90 degrees Centigrade.
Salt Fog	MIL-STD-202 Method 101D / Condition B (35 degrees Centigrade / 48 hrs).
Immersion	MIL-STD-202 Method 104A / Condition A (65 degrees Centigrade to 25 degrees Centigrade w/NaCl – 2 cycles).
Moisture Resistance	MIL-STD-202 Method 106E (65 degrees Centigrade/ 98 percent RH condensing / 240 hrs).
Temperature Shock	MIL-STD-202 Method 107D / Condition B-1 (25 cycles -65 degrees Centigrade to +125 degrees Centigrade).
Life (Elevated Temperature)	MIL-STD-202 Method 108A / Condition A (96 hours at 100 degrees Centigrade).
Dust and Waterproof Rating	IEC529 IP68 (dust-tight and water proof 24 hrs / 1 m).
Vibration	MIL-STD-202 Method 204D / Condition D (10Hz-2kHz 0.06 inch DA/20g)
Mechanical Shock	MIL-STD-202 Method 213 / Condition A (50g/11ms ~24 inches)
Gasket	EPDM or SIL.
Outer Parts	Material Aluminum, Finish Nickel.
Connectors - Outer Contact	Material Brass, Nickel Finish.
Connectors - Center Contact	Material BeCu, Gold Finish.
Insulator	PTFE.

Reviews

Customer Reviews

Questions & Answers

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Data Sheet / User Guide

Make An Offer

We would very much like you to try our product(s) and services. To that end, we would like to extend an opportunity for you to make a reasonable offer on this item that you feel is fair. Do consider the fact that we already offer promotional discount code (coupon code) for 10% off on most products (order total $300+ required, some restrictions apply). Try coupon code, 10BFCM at the checkout for 10% off, now! If it does not work for an item that you're buying or if you still wish to make an offer, please complete & submit the form below. We will respond right away during business hours.

Product Name
Quantity*

This field is required. Please enter a value.
Offer Amt. Per Unit* $

This field is required. Please enter a value.
Your Email*

This field is required. Please enter a value.
Your Phone
(no spaces/characs)*

This field is required. Please enter a value.
*

Input Correct Captcha
Do Not Fill This Out

Warning

Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.

Kevin K. of Anderson, California gave the following review:

Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.

Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.

If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.

For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.