Permanent Mount Outside Vehicle NMO Cellular Antenna with 3/4 inch mounting base + 17 ft. cable
Permanent Mount Outside Vehicle NMO Cellular Antenna with 3/4 inch mounting base + 17 ft. cable
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC203WN
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
Permanent Mount Outside Vehicle NMO Cellular Antenna with 3/4 inch mounting base, and 17 ft. RG-58U cable. SureCall NMO antenna is permanently mounted exterior car and truck cell antenna. It covers wide bands 2G, 3G, 4G, LTE (698 - 2700 MHz).
It is 3.3 inches tall. It has 50 Ohm impedance. It is a non-magnetic option exterior omni-directional vehicle antenna that includes mounting base with 17 feet RG58U cable, and FME-Female connector that exists in all SureCall vehicle cellular amplifiers.
If you need this for a weBoost or Wilson Electronics fleet cell phone signal booster control module, you will require the FME Female to SMA Female adapter to insert in between end of included cable and the booster unit.
Permanently mount your signal booster antenna with SureCall's NMO vehicle antenna and ¾ inch mounting base. NMO (Non-Magnetic Option) is ideal if a fixed antenna mount is desired or your vehicle does not have a roof that allows for a magnetic antenna such as those with an aluminum body.
Note: The permanent nature of the NMO antenna requires the help of a professional installer, as the installer will need to drill a small three quarter inch diameter hole in the roof of the vehicle and then run antenna's cable between the vehicles exterior and ceiling headliner.
This vehicular antenna purchase has mounting base with attached 17 ft. cable for connecting the NMO antenna to outside of the vehicle. It requires a 3⁄4" hole to be drilled through a metal surface with the antenna outside and the mounting base inside the vehicle.
It is installable for any type vehicle that has solid composite material roof or trunk such as metal steel or aluminum that is drillable for mounting this permanent antenna.
- FME-Female connector.
- 3.5 dBi / 5.5 dBi / 4.6 dBi.
- 50 Ohm.
- Wide band: 2G, 3G & 4G LTE (698 - 2700 MHz).
- Permanent mounting option.
- Includes mounting base with 17 ft cable.
- Requires three quarters of an inch hole in sheet metal.
Specifications:
| Frequency | 698-960 / 1700-2700 MHz |
|---|---|
| Impedence | 50 Ohm |
| Peak Gain | 698-960 MHz = 3.5 dBi, 1710-1990 MHz = 5.5 dBi, 2100-2700 MHz = 4.6 dBi |
| Polarization | Vertical |
| Radiation pattern | Omni-directional |
| Maximum power | 100 Watts |
| Connector type | FME-Female |
| Cable length | 17 ft. |
| Cable type | RG-58U |
| Height | 3.3 inches |
| Width | 1.44 inches |
| Operating temperature | -40 Degrees F to +185 Degrees F |
| Mount type | NMO |
| Hole size required | 3/4 inches |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
Does this is 12 volt or is it battery powered
This antenna is included in Fusion2Go Max Fleet cell signal booster kit. This antenna's cable connects to the cellular amplifier in that kit. The 12V Hardwire Power Supply powers the cellular amplifier itself which runs this exterior fixed screw-in NMO type antenna, as well as interior patch antenna.
Data Sheet / User Guide
Data Sheet
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
