TS9 Adapter (TS-9 Male Right Angle Crimp Connector)
TS9 Adapter (TS-9 Male Right Angle Crimp Connector)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: AFCCC100TS9M-1
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
TS-9 Adapter (TS9 Male Right Angle Crimp Connector) for Times Microwave LMR-100, LMR-100A, CommScope WBC-100 and CNT-100 plus RG Series coax cable types RG-174, RG-178, RG-188, RG-316. TS9 male 90 degrees angle crimp adapters are suitable for 100 and 300 series cables only. Examples include LMR100, LMR100A, WBC100, CNT100, RG174, RG178 and RG316 cables. Antennas that have attached coaxial cable with TS9 crimped connectors available: Glass Mount Patch Antenna; Magnet Mount Metal Roof Antenna.
TS9 connectors are used to connect cables to many different types of cell modems, cellular phones and portable wireless devices including:
- Aircard 340U
- AT&T Aircard 815S (Unite)
- AT&T Beam AC340U
- AT&T Unite Pro (Air Card 781S)
- AT&T USB Momentum LTE modem
- Franklin U770 (Sprint Tri-Mode)
- Huawei E368 (AT&T Force 4G)
- Huawei E397 (US Cellular UML397)
- Netgear 340U (AT&T Beam)
- Netgear 341U (Sprint)
- Novatel USB551L (Verizon 4G/LTE)
- Novatel MC679
- Novatel USB727
- Novatel USB760
- Sierra 305 (AT&T Lightning)
- Sierra 308 (AT&T Shockwave)
- Sierra 312U (Telstra)
- Sierra 313U (AT&T Momentum)
- Sierra 320U (Telstra)
- Sierra 330U (Rogers)
- Sierra 340U (AT&T Beam)
- Sierra 598
- Sierra 885 (AT&T Mercury)
- Sierra 889 (AT&T Compass)
- Verizon Jetpack 4460l
- Verizon Jetpack AC791L
- Verizon MiFi U620L
- Verizon Jetpack MiFi 6620L
- Verizon Jetpack MiFi 7730L
- Zing 771S
- ZTE Warp Hotspot
LMR is a registered trademark of Times Microwave Systems. CommScope, WBC and CNT are trademarks or registered trademarks of CommScope, Inc.
Specifications:
| Connector Series | TS-9 |
|---|---|
| Polarity | Standard |
| Connector Gender | Male |
| Impedance | 50 Ohm |
| Body Style | Right Angle |
| Cable Attachment Method | Center Pin: Solder; Ferrule: Crimp |
| Recommended Crimp Die | Ferrule: 0.128" |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
