An item you're pre-ordering is on backorder so it will take few days to ship - are you sure you want to proceed to order it?
CloseAC/DC 5V 4A Power Supply: 5V Home & Connect 4G/ RV 65, Drive Reach, Pro Signal 4G | 850012
AC/DC 5V 4A Power Supply: 5V Home & Connect 4G/ RV 65, Drive Reach, Pro Signal 4G | 850012
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 850012
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
AC/DC 5V 4A Power Supply: Home & Connect 4G/ RV 65, Drive Reach, Pro Signal 4G | weBoost 850012 by Wilson Electronics / WilsonPro.
This is a Packaged AC/DC Power Supply 5V, 4A, with 2.5mm x 5.5mm x 11mm DC Larger Plug. weBoost AC Power Supply for 5V Home 4G, Connect 4G, Connect RV 65, Drive Reach and Wilson Pro Signal 4G M2M series signal boosters. This We Boost / Wilson cable cord helps power several wireless signal booster series kits using a standard indoor wall 110 volts electrical power jack or power outlet. This is Packaged AC/DC Power Supply 5V, 4A, with 2.5mm x 5.5mm x 11mm DC larger plug. Precise Specs.: 110/240VAC 50/60Hz to 5VDC/4A with 6 feet Cable. (AC) 5V/4A. 2.5mm x 5.5 mm x 11 mm jack. UPC: 811815028529.
Please note: This is for 5V amplifiers and it has a USB port. If you need for 12V amplifier, you must buy part # 850015. The latter part number 850015 has the USB port replaced with a physical switch that clearly shows if the amp is switched on or off. This part # 850012 (this purchase) is for the 5V Booster, and the part # 850015 (not this purchase) is for the 12 V booster. They are not compatible with each other. When you look at the booster where the power supply plugs into it, there's a line and dashes plus states 5V or 12V. Buy accordingly.
Cell phone amplifier charger or power adapter compatible specifically with:
- Home 4G (470101 / 470001, 460101 / 460001. Product #: 470001. Model #: 460020).
- Connect 4G (470103 / 470003, 460103 / 460003).
- Connect RV 65 (471203 / 471003).
- Pro Signal 4G & IoT 5-Band (460119 / 460019 | 470119 / 470019).
- Pro Signal 4G Security & IoT 5-Band Security (461119 / 461019 | 471119 / 471019).
- Basic Home (471101 / 471001).
- Home Room (472120 / 472020).
- weBoost Drive Reach Series.
This replacement power supply adapter and cord is already included in following complete kits:
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
This power adapter 850012 is out of stock at your website but I need it asap so is there another part # that can possibly work with my Weboost Basic Home Power Supply (471101)? It does not matter even if it requires only 12V power source because I can get backup 12v battery source in my home using USB or 12V cigarette lighter adapter socket.
Unfortunately no, sorry, we do not recommend any other power supplies that will work for your weBoost Home Basic model # 471101.
-
How can I tell which power supply part number I need if I do not know the model name? My booster just says the brand WEBOOST but no model name. There are some weird alphabet and number combinations like U47.... written on the back of signal amplifier though. Please help!
If you had stated the full number after the U47 like U47XXXX, we would have been able to respond with the power supply part number you need to power your signal amplifier. Anyway, if the serial number label states the product number is U470061, the kit comes with this power supply part number weBoost 850012 - AC/DC 5V/4A. If the product number states U471061 - that is the 12V version amp which uses the weBoost 850010 AC/DC 12V/3A. If the product number states U470054, it also requires this weBoost 850012.
-
What is the working temperature range for this adapter?
The signal boosters are designed so that heat expresses through the connector sites. These temps can reach up to 150 degrees, as the cell phone booster works. However, if you are concerned about heat at any time, please feel free to let us know. Our products are backed by manufacturers warranty.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
