3G 4G 5G (617-2700 MHz) Indoor Ceiling-Mount Thin Dome Antenna (50 Ohm)
3G 4G 5G (617-2700 MHz) Indoor Ceiling-Mount Thin Dome Antenna (50 Ohm)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-528W
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Ultra-Wideband Indoor Multi-Directional Ultra-Thin Dome Antenna.
5G antenna designed to blend seamlessly into any environment. Are you buying this antenna to add to an existing cellular booster system? Consider purchasing 5G interior antenna expansion kit(s) because they include the splitter and cable you will need to integrate this antenna into current cell phone signal booster system. This 5G SureCall Ultra-Thin Antenna is a low-profile ceiling-mount dome antenna for in-building cell phone signal boosters. Ultra-Wideband indoor antenna transmits and receives signal in a 360-degree pattern and is designed to cover 2G/3G/4G/5G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. 2 / 4 / 6 dBi Max Gain. N-Female connector. 50 Ohm. Ultra-Wideband: 617 - 2700 MHz. 5G Band 71 compatible that includes T-Mobile 5G Sub-6 Frequency. Includes mounting hardware. SKU / Part Number: SC528W. UPC: 854328008459.
- Ultra-wideband : 2G, 3G, 4G, 5G, (617 - 2700 MHz) indoor ceiling-mount dome antenna.
- 2 / 4 / 6 dBi Max Gain.
- N-Female connector (50 ohm).
- Includes mounting hardware.
- Connects with SC-400 cable (sold separately).
Install Guidelines.
In addition to the antenna, mounting options are included for installations with or without a crawl space. Be sure to deploy the antenna in an area central to your desired indoor signal coverage where there are minimal obstacles. Ultimately, the in-building range of this antenna depends on three factors:
- Physical obstructions.
- Power generated by booster.
- Signal level received by the outdoor antenna.
Installation.
If accessible by crawl space:
- Drill a 20 mm diameter hole in the ceiling. The size should be large enough to allow the antenna's plastic cable base to pass through.
- Place antenna cable through hole.
- From crawl space, screw the fixing nut onto antenna and fasten around the threaded plastic cable base.
- Connect female antenna connector with SC-400 cable that leads to your booster port marked INSIDE.
If not accessible by crawl space:
- Drill a 20 mm diameter hole in the ceiling. The size should be large enough to allow the antenna's plastic cable base to pass through.
- Use metal mounting plate to align, mark and drill 3 holes into ceiling surface and insert provided anchors.
- Secure metal mountings plate to ceiling by inserting provided screws through mounting plate (with interlocking pegs facing down) and into ceiling anchors.
- Push antenna to bracket surface allowing cable to pass through ceiling. Align keyhole mounts on the antenna with down-facing pegs and twist into place.
- Connect female antenna connector with SC-400 cable that leads to your booster port marked INSIDE.
Note: Wherever possible, it is recommended to provide maximum separation between exterior and interior antennas.
Compatibility.
Signal Amplifier Compatibility: All brands 2G-5G cell phone boosters including SureCall 2G-5G home and industrial in-building signal boosters. Cable Compatibility: Low loss coax cables with N Male on either end (SC-400, SC-240, etc). Accessory Compatibility: All brands of 50 Ohm Couplers and Splitters.
5G Ultrathin Dome Antenna Specifications:
| Frequency: | 617-697 / 698-960 / 1710-2700 MHz. |
|---|---|
| Beamwidth: | H:360° E:80°/ H:360° E:80°/H:360° E:45°. |
| Max. Gain: | 2 / 4 / 6 dBi. |
| VSWR: | < 2. |
| Input Impedance: | 50 Ohm. |
| Polarization Type: | Vertical. |
| Max Power: | 50W. |
| Beamwidth: | 360 degrees. |
| Radiation Pattern: | Omni-Directional. |
| Connector Type: | N-Female. |
| Mount Type: | Ceiling-mount. |
| Height: | 2.11 inches. |
| Diameter: | 12.2 inches. |
| Weight: | 1.21 Ibs. |
| Cover Material: | PC+ABS. |
| Operating Temp. (degrees fahrenheit): | -45 ~ +108. |
For more details about Ultra Wide Band Omni-directional Ceiling-Mount Inside Antenna, please check 5G indoor ultra thin dome antenna data sheet.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
If, as you say, "Dome antennas spread signal in all directions," then why do you also say that they are for ceiling mount? Presumably, if it is easier access to wiring through walls to get to a wall location, that should be fine, because they are (supposedly) omni-directional. Are they, or aren't they, omnidirectional (which, one notes, also means approximately the same radiation pattern both up and down, so if mounted in a downstairs ceiling, would also radiate upward to serve a second floor? I understand the issue with wall/ceiling obstructions, etc., but wonder what the radiation pattern really is for the dome? Can you please clarify?
Dome antennas have a wider beam width and thus they spread signals in all directions. Consequently, they are more suitable for mounting on ceilings because signals disperse and do not project as far out - just enough to cover open spaces in its path (below, if mounted on ceiling or rest of the room, if mounted on wall). They can certainly be mounted on wall to provide better signal in that room but signals will probably not be able to penetrate through walls to provide better reception in room(s) farther away from it.
Normally, we do not recommend using a dome antenna on a wall because while the vertical beam width is 360 degrees, the horizontal one is only 60 degrees. The way it distributes signal, it will project signals only about 10 feet or till edge of the room with open space. Dome antennas are made for spreading signal out like in an office space with 8-10ft. ceilings where the signal can go out the sides. Thus, if it is on a wall, it won't go out the same as it would on a ceiling.
Panel antennas have a narrow beam width and thus they project signal in single direction enabling signals to project farther. Consequently, they are more suitable for wall mounting on one side of the house (or on wall facing long stretch of corridor, etc.) or facing the rest of the house so signals can reach areas far away and penetrate through the walls better, across entire home. Due to their narrow width beam signal projection, Panel antennas are thus also sometimes installed on ceiling when better reception is also needed on the floor below.
Here's more info, details, and video that may help you understand the workings and differences between a Dome and a Panel antenna.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
